Long Range Wireless Remote Control Switch Kit- 4 AC Receivers and a RF Transmitter (Model: 0020622)

Regular price $88.00

Shipping calculated at checkout.

Application:
This is a long distance 110V 220V 3A wireless remote control switch kit, with four 1 channel AC power input output radio receivers and a RF transmitter with 4 buttons.
This kit can long range remote control low power AC electrical equipments, such as lamps, lights, LED lighting, motors, fans, pump, electric solenoid valves, etc.

Feature:
Wireless control, easy to install.
Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.
AC Power Output: It can control AC equipment with voltage AC 110V, 120V, 220V or 240V.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.

Receiver Parameters:
Model No.: S1XC-AC
Power Supply (Operating Voltage): AC100~120V (S1XC-AC110), AC200~240V (S1XC-AC220)
Output Type: AC100~120V (S1XC-AC110), AC200~240V (S1XC-AC220)
Channel: 1 Way
3 Selectable Modes: Self-locking, Momentary, Interlocking
Maximum Load Current of Relay: 3A
Wire Range of Terminals: 22-14AWG
Operating Temperature: -20°C ~ +70°C
PCB size: 80mm x 35mm x 14mm
Case size: 100mm x 40mm x 24mm

Transmitter Parameters:
Model No.: 0021018 (CV-4)
Channel/Button: 4
Button Symbol: 1, 2, 3, 4
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 15mA
Operating Frequency: 433MHz
Transmitting Distance: 500 meters / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 110mm x 50mm x 18mm

Matching Transmitters:
The receiver can work with different transmitters, such as model C-4 (100 meters)CP-4 (500 meters)  CD -4 (1000 meters, waterproof, industrial), or CB -4 (1000 meters).

Working Range:
With a transmitter (such as CV-4) to form a complete set, the maximum working distance can reach 500 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can use a powerful transmitter, such as CB-4 transmitter.

Setting different control modes:
1) Setting Self-locking mode (works with transmitter CV-4): Only connect S1.
Press the button 1 on the transmitter: The lamp connected to receiver 1 is turned on.
Press the button 1 on the transmitter again: The lamp connected to receiver 1 is turned off.
Press the button 2 on the transmitter: The lamp connected to receiver 2 is turned on.
Press the button 2 on the transmitter again: The lamp connected to receiver 2 is turned off.
...
Press the button 4 on the transmitter: The lamp connected to receiver 4 is turned on.
Press the button 4 on the transmitter again: The lamp connected to receiver 4 is turned off.

2) Setting Momentary mode (works with transmitter CV-4): Do not connect S1 and S2.
Press and hold the button 1 on the transmitter: The lamp connected to receiver 1 is turned on.
Release the button 1 on the transmitter: The lamp connected to receiver 1 is turned off.
Press and hold the button 2 on the transmitter: The lamp connected to receiver 2 is turned on.
Release the button 2 on the transmitter: The lamp connected to receiver 2 is turned off.
...
Press and hold the button 4 on the transmitter: The lamp connected to receiver 4 is turned on.
Release the button 4 on the transmitter: The lamp connected to receiver 4 is turned off.

3) Setting Interlocking mode (works with transmitter CV-4): Only connect S2.
Press the button 1 on the transmitter: The lamp connected to receiver 1 is turned on; The lamps connected to the other 3 receivers are all turned off.
Press the button 2 on the transmitter: The lamp connected to receiver 2 is turned on; The lamps connected to the other 3 receivers are all turned off.
...
Press the button 4 on the transmitter: The lamp connected to receiver 4 is turned on; The lamps connected to the other 3 receivers are all turned off.