2 Channels 30A AC Power Output Wireless Switch or RF Receiver (Model: 0020048)

Regular price $65.00

Shipping calculated at checkout.

Application:
This RF wireless remote control switch (receiver) is an electric device with 2 channels AC 120V 220V output, it and the transmitter form a radio transmitter and receiver system. This system may be used in all types of industry automation, agriculture, home, factory, house, farm, vehicle, ship, offshore operations, etc.
It can long range remote control lamps/ lights, motors, fans, pump, electric solenoid valves, and business signs.

Feature:
Wireless remote control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.
AC Power Output: It can control AC equipment with voltage AC 110V, 120V, 220V or 240V.
High Power: Each channel can work at maximum load current 30A.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.

Receiver Parameters:
Model No.: S2PX-AC
Operating Voltage: 100~240VAC (110V/120V/220V/240V)
Output Type: 100~240VAC (110V/120V/220V/240V)
Channel: 2 CH
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 30A / each channel
Selectable Modes: Self-locking, Momentary, Interlocking, Delay
Working Frequency: 433.92 MHz
Wire Range of Terminals: 22-12AWG
Operating Temperature: -20°C ~ +70°C
PCB size: 140 x 73 x 18 mm (5.5 x 2.9 x 0.7 inches)
Case size: 192 x 100 x 45 mm (7.6 x 4.0 x 1.8 inches)

Matching Transmitters:
he receiver can work with different transmitters, such as model C-2 (100 Meter / 300 feet range)CP-2 (500 Meter / 1500 feet range)  or CB-2 (1000 Meter / 3000 feet range).

Working Range:
With a transmitter (such as C-2) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can use a powerful transmitter, such as CB-2 transmitter.

Usage:
The receiver can be used to control AC 110~240V equipments.

Setting different control modes:
1) Setting Self-locking mode: Press and hold the button of receiver until signal LED flashes 3 times, then release button.
Control mode Self-locking (working with transmitter C-2): Press -> On; Press again -> Off.
Press button A of the transmitter: Terminals “OUT1” of receiver outputs AC power, the lamp 1 is turned on.
Press button A of the transmitter again: Terminals “OUT1” of receiver stops outputting, the lamp 1 is turned off.
Press button B of the transmitter: Terminals “OUT2” of receiver outputs AC power, the lamp 2 is turned on.
Press button B of the transmitter again: Terminals “OUT2” of receiver stops outputting, the lamp 2 is turned off.

2) Setting Momentary mode: Press and hold the button of receiver until signal LED flashes 2 times, then release button.
Control mode Momentary (working with transmitter C-2): Press and hold -> On; Release -> Off.
Press and hold button A of the transmitter: Terminals “OUT1” of receiver outputs AC power, the lamp 1 is turned on.
Release button A of the transmitter: Terminals “OUT1” of receiver stops outputting, the lamp 1 is turned off.
Press and hold button B of the transmitter: Terminals “OUT2” of receiver outputs AC power, the lamp 2 is turned on.
Release button B of the transmitter: Terminals “OUT2” of receiver stops outputting, the lamp 2 is turned off.

3) Setting Interlocking mode: Press and hold the button of receiver until signal LED flashes 1 time, then release button.
Control mode Interlocking (working with transmitter C-2): Press -> On, Press another button -> Off.
Press button A of the transmitter: Terminals “OUT1” of receiver outputs AC power, the lamp 1 is turned on; Terminals “OUT2” of receiver stops outputting, the lamp 2 is turned off.
Press button B of the transmitter: Terminals “OUT2” of receiver outputs AC power, the lamp 2 is turned on; Terminals “OUT1” of receiver stops outputting, the lamp 1 is turned off.

4) Setting Delay mode: Press and hold the button of receiver until signal LED flashes 4 times, then release button.
Control mode Delay (working with transmitter C-2): Press -> ON; Then OFF by itself after 5 seconds.
Press button A of the transmitter: Terminals “OUT1” of receiver outputs AC power, the lamp 1 is turned on.
After 5 seconds: Terminals “OUT1” of receiver stops outputting, the lamp 1 is turned off.
Press button B of the transmitter: Terminals “OUT2” of receiver outputs AC power, the lamp 2 is turned on.
After 5 seconds: Terminals “OUT2” of receiver stops outputting, the lamp 2 is turned off.

Package Include:
1 x Receiver: S2PX-AC
1 x User manual