Application:
This is a long distance 1 channel DC 4~12V small wireless remote control switch kit with RF transmitter and radio receiver. For long range control the extension and retraction of our micro electric actuator G series and H series.
Features:
Wireless control, easy to install
Control micro electric actuator G series and H series with voltage DC 4~12V.
The wireless RF signal can pass through walls, floors and doors.
One/several transmitters can control one/several receivers simultaneously.
Receiver Parameters:
Model: S1F1-DC (4~12V)
Power Supply (Operating Voltage): DC 4~12V
Output: DC 4~12V
Working Frequency: 433MHz
Control Modes: Momentary, Interlocking
Static Current: 2mA~5mA
Maximum Power for Motor: 10W
Operating Temperature: -20 ° C to +70 ° C
PCB Size: 20mm x 19mm x 10mm
Matching Transmitters:
This receiver can work with different transmitters. Such as model C-2L-2 (100 meters), or CB-3-2 (1000 meters) etc.
Transmitter Parameters:
Model No.: C-2L-2
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 2
Button Symbol: ▲, ▼
Operating Voltage: 12V (1 x 23A -12V battery)
Operating Current: 3mA
Transmitting Distance: 100m / 300ft (theoretically)
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm
Working Range:
With a transmitter (such as C-2L-2) to form a complete set, the maximum working distance can reach 100 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as transmitter CB-3-2.
Setting different control modes:
1) Setting Interlocking mode: Connect two setting terminals until signal LED flashes 1 time, then disconnect.
Control mode Interlocking (with the transmitter like CB-3-2): Press -> On, Press another button -> Off.
Press button ▲ on the transmitter: Wires C and D output DC 4~12V (C is “+” , D is “-”); The electric linear actuator connected to receiver extends outward.
Press ■ on the transmitter: Wires C and D stop outputting; The electric linear actuator connected to receiver stops extending outward.
Press button ▼ on the transmitter: Wires C and D output DC 4~12V (C is “-” , D is “+”); The electric linear actuator connected to receiver retracts inward.
Press ■ on the transmitter: Wires C and D stop outputting; The electric linear actuator connected to receiver stops retracting inward.
2) Setting Momentary mode (with the transmitter like C-2L-2): Connect two setting terminals until signal LED flashes 3 times, then disconnect.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button ▲ on the transmitter: Wires C and D output DC 4~12V (C is “+” , D is “-”); The electric linear actuator connected to receiver extends outward.
Release button ▲ on the transmitter: Wires C and D stop outputting; The electric linear actuator connected to receiver stops extending outward.
Press and hold button ▼ on the transmitter: Wires C and D output DC 4~12V (C is “-” , D is “+”); The electric linear actuator connected to receiver retracts inward.
Release button ▼ on the transmitter: Wires C and D stop outputting; The electric linear actuator connected to receiver stops retracting inward.
Package Include:
1 x Receiver: S1F1-DC
1 x transmitter: C-2L-2
1 x User manual