Note:
1. This product does not contain a mounting brackets, the mounting bracket of this actuator is a 500N bracket and a 2000N bracket. If you need it, please click here to buy.
2. If you need a power supply adapter, please click here to buy.
3. If you need external limit switches for the linear actuator, please click here to buy.
Mainly used for cars, lifting platforms, skylight, massage couches, electric beds, medical chairs and electric devices. It can push, pull, lift and descend other devices.
Product Feature:
High speed
Stroke customization
Aluminum casing and Telescopic tube
Wear and corrosion resistance
Low noise design
Permanent magnet DC motor drive
Built-in limit switch prevents over-extending and over-compressing.
Can be controlled by wired and wireless controllers.
Easy to use, easy to operate.
Parameters:
Working voltage: DC 12V or DC 24V
Speed: 45mm±5mm/s, or 80mm±10mm/s, or 140mm±15mm/s, or 230mm±25mm/s
Working current: 3A (you should choose a 6A power adapter to power this actuator, like our model 0010127)
Linear actuator diameter: 55mm
Shaft diameter: 25mm
Mounting holes diameter: 8mm
Environment temperature: -26℃ to 85℃
Noise level: lower than 42dB
IP rating: IP54
| Stroke Length (mm) | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
| Retracted Length (mm) | 285 | 335 | 385 | 435 | 485 | 535 | 585 | 635 |
| Extended Length (mm) | 335 | 435 | 535 | 635 | 735 | 835 | 935 | 1035 |
Relationship between maximum load capacity and speed:
| Speed | 45mm/s | 80mm/s | 140mm/s | 230mm/s |
| Maximum load capacity | 200N / 40 lbs / 20Kg | 100N / 20 lbs / 10Kg | 70N / 14 lbs / 7 Kg | 50N / 10 lbs / 5 Kg |