Wiring for Wireless Switch RF Receiver with Relay Output
Relay Output: It can be used to operate both DC and AC equipments. With three output terminals: NO, COM, NC, which serves as a switch. That means you should also connect a separate power supply to equipments.
Wiring for the DC Version Wireless Switch RF Receiver
1) If you want to control a DC device, do as following:
1-1) Connect the positive pole of DC power supply to terminal "L/+" of the receiver;
1-2) Connect the negative pole of DC power supply to terminal "N/-" of the receiver;
1-3) Connect the positive pole of DC power supply to normally open terminal of the receiver;
1-4) Connect the negative pole of DC power supply to terminal the negative pole of DC device;
1-5) Connect the positive pole of DC device to common terminal of the receiver.
2) If you want to control an AC device, do as following:
2-1) Connect the positive pole of DC power supply to terminal "L/+" of the receiver;
2-2) Connect the negative pole of DC power supply to terminal "N/-" of the receiver;
2-3) Connect the live wire of AC power supply to normally open terminal of the receiver;
2-4) Connect the neutral wire of AC power supply to the neutral wire of AC device;
2-5) Connect the live wire of AC device to common terminal of the receiver.
2-6) If the AC device has a ground wire, please connect it to the AC power supply's ground wire.
Wiring for the AC Version Wireless Switch RF Receiver
1) If you want to control a DC device, do as following:
1-1) Connect the live wire of AC power supply to terminal "L/+" of the receiver;
1-2) Connect the neutral wire of AC power supply to terminal "N/-" of the receiver;
1-3) Connect the positive pole of DC power supply to normally open terminal of the receiver;
1-4) Connect the negative pole of DC power supply to terminal the negative pole of DC device;
1-5) Connect the positive pole of DC device to common terminal of the receiver.
2) If you want to control an AC device, do as following:
2-1) Connect the live wire of AC power supply to terminal "L/+" of the receiver;
2-2) Connect the neutral wire of AC power supply to terminal "N/-" of the receiver;
2-3) Connect the live wire of AC power supply to normally open terminal of the receiver;
2-4) Connect the neutral wire of AC power supply to the neutral wire of AC device;
2-5) Connect the live wire of AC device to common terminal of the receiver.
2-6) If the AC device has a ground wire, please connect it to the AC power supply's ground wire.
　
Wiring for Wireless Switch RF Receiver with Relay Output
Posted by 1Cary on