1 Channel 3 Phase 220V 380V Remote Control Switch or Wireless Receiver (Model: 0020068)

Regular price $44.00

Shipping calculated at checkout.
Application:
This receiver is an electric device with AC 220V 380V power input output, it and the transmitter form a wireless remote control switch kit. This kit can long range remote control lamp, light, motor, electric solenoid valve, pump, fan, heater, etc.

Feature:
Wireless control, easy to install.
Universal Power Supply: AC 75~400V, support AC 110V, AC 120V, AC 220V, AC 240V, AC 380V.
AC Power Output: It can directly control AC 110V or 220V equipments, or control 380V AC equipment by the contactor.
Each channel can work at maximum current 10A.
With external telescopic antenna, the receiver have a farther working range.
You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With characteristics of reverse power protection and over current protection.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:
Model No.: S1X-AC380-ANT3
Power Supply (Operating Voltage): AC 75~400V (110V/120V/220V/240V/380V)
Output: AC 75~400V (110V/120V/220V/240V/380V)
Channel: 1 Way
Control Modes: Interlocking
Static Current: ≤6mA
Maximum Load Current: 10 A / each channel
Working Frequency: 433.92MHz
Wire range for the terminals: 22-12 AWG
Operating Temperature: -20 ° C to +70 ° C
Case size: 105mm x 55mm x 29mm

Matching Transmitters:
The receiver can work with different transmitters, such as model C-2 (100 metres), CP-2 (500 metres) or CB-2 (1000 metres) etc.

Working Range:
With a transmitter (such as CP-2) to form a complete set, the maximum working distance can reach 500 metres in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can replace external antenna of the receiver or use a high-power transmitter, such as CB-2 transmitter.

Usage (with the transmitter CP-2):
The receiver can be used to control AC 110V or 220V pumps, motors and other equipments, or AC 380V equipments by the 380V contactors, and it can’t directly connected to the 380V equipments.

Working mode:
Mode Interlocking (working with transmitter CP-2): Press -> On; Press another button -> Off.
Press button A of the transmitter: The receiver outputs AC power (the digital tube displays "On"), and turns on the equipment.
Press button B of the transmitter: The receiver stops to output AC power (the digital tube displays "OFF"), and turns off the equipment.

Working with manual button on the receiver:
Press the button on the receiver: The receiver outputs AC power (the digital tube displays "On"), and turns on the equipment.
Press the button again: The receiver stops to output AC power (the digital tube displays "OFF"), and turns off the equipment.

Package Include:
1 x Receiver: S1X-AC380-ANT3
1 x User manual