DC Wireless Remote Control Switch Kit 4-CH 7A Relay Output 3mi (Model: 0020013)

Regular price $115.00

Shipping calculated at checkout.

The Model 0020013 is an industrial long-range wireless remote control switch kit designed for reliable multi-channel remote operation over distances up to 5 km (3 miles). Operating on DC 12V or DC 24V power, the receiver features 4 independent dry contact relays capable of switching both DC and AC powered equipment. Equipped with LoRa/FSK modulation and an intelligent two-way communication protocol, the handheld transmitter provides immediate audible buzzer feedback upon successful signal reception, ensuring full operational confirmation even when the equipment is out of sight.

Key Features

  • Ultra-Long Working Range: Advanced LoRa/FSK RF technology delivers a line-of-sight wireless transmission range of up to 5,000 meters (3 miles).
  • Two-Way Audio Feedback: The transmitter emits an audible buzzing sound when the receiver executes the command, confirming activation in real time.
  • 4-Channel Dry Contact Relays: Isolated NO/NC relay outputs support independent switching of both DC and AC equipment (up to 7A per channel).
  • 3 Selectable Control Modes: Configurable on-board DIP switches allow easy selection between Self-locking (Toggle), Momentary, and Interlocking (Latched) modes.
  • External Antenna Options: Receiver includes SMA antenna port compatible with rubber duck, telescopic, or high-gain magnetic mount extension antennas for optimal RF reception.

Technical Specifications

  • Kit Model: 0020013
  • Receiver Model: S4UW-DC-ANT3 (S4UW-DC12 for DC 12V, S4UW-DC24 for DC 24V)
  • Operating Voltage: DC 12V ±1V or DC 24V ±2V
  • Quiescent Current: ≤5 mA
  • Relay Channels: 4 Channels
  • Relay Output Type: Dry contact (Normally Open / Normally Closed)
  • Max Load Current: 7A per channel
  • Operating Frequency: 433MHz
  • Operating Temperature: -20°C to +70°C (-4°F to +158°F)
  • Receiver Dimensions: PCB: 93 x 87 x 17 mm; Enclosure: 115 x 90 x 40 mm
  • Transmitter Model: 0021062 (CC-4) / CCW-4
  • Transmitter Power: 9V battery (1 x 6F22 9V battery)
  • Modulation: FSK + LoRa
  • Transmitter Dimensions: 135 x 42 x 25 mm

Applications

  • Industrial automation and agricultural irrigation systems.
  • Long-range control of DC motors, linear actuators, and electric winches.
  • Remote switching of solenoid valves, water pumps, fans, and security lights.
  • Barrier gates, access control locks, and overhead doors.

Control Modes & DIP Switch Settings

  • Self-Locking Mode (Toggle): Turn ON bit 3 of the DIP switch. Pressing button A activates Relay 1 (turns connected device on); pressing button A again deactivates Relay 1 (turns connected device off). Channels B, C, and D operate identically.
  • Momentary Mode: Turn OFF bits 2 and 3 of the DIP switch. Pressing and holding button A activates Relay 1; releasing button A deactivates Relay 1. Channels B, C, and D operate identically.
  • Interlocking Mode (Latched): Turn ON bit 2 of the DIP switch. Pressing button A activates Relay 1 and shuts off all other relays; pressing button B activates Relay 2 and shuts off all other relays.

Package Includes

  • 1 x 4-Channel DC Receiver (Model: S4UW-DC-ANT3)
  • 1 x Long-Range 4-Button RF Transmitter (Model: CC-4)
  • 1 x User Manual

Compatible Extra Transmitters: This receiver operates with our 5 km transmitters, including the standard CC-4 (5km / 3mi Range) and the waterproof CCW-4 (Waterproof 5km / 3mi Range).