Note: This product is not suitable for US 220V electric motors.
Package Include:
1 x Receiver: S1PFC-AC
1 x Transmitter: CB-3-2
1 x User manual
Application:
For long range wireless remote control of single phase AC 120V 220V electric motor clockwise (CW), counterclockwise (CCW) and stop.
Features:
Wireless control, easy to install.
Waterproof: The receiver has a waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (110V~120V) used in US, CA, etc, and 220V AC (220V~240V) used in DE, UK, FR, etc.
With limit control terminals: You can connect limit switches or sensors to stop the motor.
You can rotate a motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No.: S1PFC-AC-ANT3
Operating Voltage: Compatible with AC 100~240V
Output Type: AC power output, same as input voltage.
Channel: 1 Way
Control Mode: Momentary and Interlocking
Static Current: ≤6mA
Maximum Working Current: 30A, so motor's maximum starting current can’t exceed 30A.
Working Frequency: 433.92MHz
PCB Size: 140 x 73 x 18 mm
Case Size: 192 x 100 x 45 mm
Transmitter Parameters:
Model No.: 0021047 (CB-3-2)
Channel/Button: 3
Button Symbol:Â â–˛, â–‡, â–Ľ
Operating Voltage: 9V (1 x 6F22 -9V battery)
Operating Current: 30mA
Operating Frequency: 433.92MHz
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: Unit Size: 135 x 42 x 25 mm
Suitable Transmitters:
This radio receiver can work with different RF transmitters, such as model C-3-2 (100 Meter), CP-3 (500 Meter), and CB-3-2 (1000 Meter).
Working Range:
The kit has a maximum working distance of 1 km in an open ground.
The maximum working distance is a theoretical data; it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
Wiring (Control ordinary single phase motor or tubular motor):
1) Connect the common line of the AC motor to terminal “COM” of the receiver;
2) Connect the positive and reversal wires of AC motor to terminals “UP” and “DOWN” of the receiver (You can exchange motor's two wires to change the rotating direction of motor);
3) Connect the live wire of AC power supply to terminal “L” of the receiver;
4) Connect the neutral wire of AC power supply to terminal “N” of the receiver;
5) Connect the ground wire to the metal housing of the AC motor.
Setting different control modes:
1) Setting Momentary mode: Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.
The operation of Momentary mode with the transmitter CB-3-2:
Press and hold button â–˛ of transmitter: Motor rotates in positive direction.
Release button â–˛ of transmitter: Motor stops.
Press and hold button â–Ľ of transmitter: Motor rotates in reversal direction.
Release button â–Ľ of transmitter: Motor stops.
2) Setting Interlocking mode: Press the learning button in the receiver 4 times, signal LED continuously flashes 4 times and then goes off.
The operation of Interlocking mode with the transmitter CB-3-2:
Press button â–˛ of transmitter: Motor rotates in positive direction.
Press button â– of transmitter: Motor stops.
Press button â–Ľ of transmitter: Motor rotates in reversal direction.
Press button â– of transmitter: Motor stops.
Limit control terminals:
The receiver has limit control terminals, and you can connect external devices (with normally closed contact), such as sensors, limit switches to limit terminals, then use them to stop the motor.
For example, you can connect a normally closed limit switch to terminals "S1", and connect another normally closed limit switch to terminals "S2".
When motor rotates in positive direction, If the limit switch (sensor) connected to the receiver terminals "S1" is triggered, the motor will stop automatically.
When motor rotates in reversal direction, If the limit switch (sensor) connected to the receiver terminals "S2" is triggered, the motor will stop automatically.