Package Include:
1 x Receiver: S2PUW-AC-ANT3
1 x Transmitter: CC-2 or CCW-2
1 x User manual
Application:
For long range wireless remote control AC and DC equipments, such as lamp, LED lighting, motor, solenoid valve, pump, electric lock, heater, etc.
Feature:
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (100V~120V) used in US, CA, etc, and 220V AC (200V~240V) used in DE, UK, FR, etc.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
Feedback Function:
The receiver and the transmitter have a Two-way working mode, so the user can know the working status of the receiver by the transmitter.
Two-way working mode: When the receiver is successfully triggered by the signal from the transmitter, it will immediately transmit a feedback signal to the transmitter, then the transmitter will send out a buzzing sound to inform you that the receiver has been successfully triggered.
Receiver Parameters:
Model: S2PUW-AC-ANT3
Operating Voltage: Compatible with AC 100V~240V
Output Type: Dry Relays Output (Normally Open and Normally Closed)
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 30A / each channel
Channel: 2 CH
3 Selectable Modes: Self-locking, Momentary, Interlocking
Working Frequency: 433MHz
Operating Temperature: -20°C ~ +70°C
PCB size: 88 x 80 x 18 mm
Case size: 153 x 90 x 55 mm
Transmitter Parameters:
Model: 0021061 (CC-2)
Channel / Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 6F22-9V battery)
Operating Frequency: 433MHz
Modulation Mode: FSK + LORA
Feedback indication: buzzing sound
Transmitting Distance: 5000 meters / 15000 feet (theoretically)
Unit Size: 135 x 42 x 25 mm
Suitable Transmitters:
This receiver only works with 5000 meters transmitters, model CC-2 (5000 meters / 15000 ft range) and CCW-2 (waterproof, 5000 meters / 15000 ft range).
Working Range:
The kit has a maximum working distance of 5km (3mi) in open areas.
The maximum working distance is based on theoretical data which would be without barriers and without any RF interference. In practice, it will be hindered by trees, walls or other construction, and will be interfered with by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.
Usage:
The receiver can be used to control both DC and AC devices.
Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals <COM> and <NO> are Normally Open; Terminals <COM> and <NC> are Normally Closed.
Setting different control modes:
1) Setting Self-locking mode: Turn on the third bit of the dip switch.
The operation of Self-locking mode with the transmitter CC-2:
Press the button A on the transmitter: The relay 1 in the receiver is activated, and the corresponding connected device is turned on.
Press the button A again: The relay 1 is deactivated, and the corresponding connected device is turned off.
Press the button B on the transmitter: The relay 2 in the receiver is activated, and the corresponding connected device is turned on.
Press the button B again: The relay 2 is deactivated, and the corresponding connected device is turned off.
2) Setting Momentary mode: Turn off the second bit and the third bit of the dip switch.
The operation of Momentary mode with the transmitter CC-2:
Press and hold the button A on the transmitter: The relay 1 in the receiver is activated, and the corresponding connected device is turned on.
Release the button A: The relay 1 is deactivated, and the corresponding connected device is turned off.
Press and hold the button B on the transmitter: The relay 2 in the receiver is activated, and the corresponding connected device is turned on.
Release the button B: The relay 2 is deactivated, and the corresponding connected device is turned off.
3) Setting Interlocking mode: Turn on the second bit of the dip switch.
The operation of Interlocking mode with the transmitter CC-2:
Press the button A on the transmitter: The relay 1 in the receiver is activated, and the corresponding connected device is turned on; The relay 2 is deactivated, and the corresponding connected device is turned off.
Press the button B on the transmitter: The relay 2 in the receiver is activated, and the corresponding connected device is turned on; The relay 1 is deactivated, and the corresponding connected device is turned off.