Package Include:
1 x Receiver: S1UA-AC380
1 x Transmitter: CP-2-2
1 x User manual
Application:
This is a three-phase AC power 380V input output wireless remote control switch kit with RF transmitter and receiver.
For long range control ON and OFF of the AC 380V electric equipment, such as lamp, light, motor, pump, fan, heater, etc.
Feature:
Wireless control, easy to install.
Lack-phase protection: To prevent equipment burned down
With an AC 380V contactor
With telescopic antenna, the receiver have a farther working range.
You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No.: S1UA-AC380
Power Supply (Operating Voltage): Three-phase AC power 380V
Output Type: Three-phase AC power 380V
Channel: 1 Way
Control Modes: Interlocking
Static Current: ≤6mA
Maximum Working Current: 18A, 380V/4KW or 32A, 380V/8KW
Operating Temperature: -20 ° C to +70 ° C
Case size: 200 x 135 x 120 mm
Transmitter Parameters:
Model No.: CP-2-2
Channel/Button: 2
Button Symbol: ON, OFF
Operating Voltage: 12V (1 x 23A -12V battery)
Operating Current: 8mA
Transmitting Distance: 500 meters / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 85 x 36 x 16 mm
Applicable Transmitters:
The receiver can work with different transmitters, such as model CP-2 (500 metres), CG-2 (500 meters, wall mounted) and CB-2 (1000 metres).
Working Range:
With a transmitter (such as CP-2-2) to form a complete set, the maximum working distance can reach 500 metres in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can use a high-power transmitter, such as CB-2 transmitter.
Usage:
The receiver can be used to control AC 380V pumps, motors and other equipments.
Wiring:
1) Connect three lines of the AC three phase 380V power supply to terminals “L1”, “L2” and “L3” of the receiver;
2) Connect three lines of the AC three phase 380V equipment to terminal “T1”，“T2” and “T3” of the receiver.
Operating:
Control AC three phase 380V equipment by transmitter CP-2-2
1) Press the button "ON" of the transmitter, receiver outputs AC 380V power, the 380V equipment works.
2) Press the button "OFF" of the transmitter, receiver stops to output AC 380V power, the 380V equipment stops to work.
Control AC three phase 380V equipment by manual button of receiver
1) Press button "ON" of the receiver, receiver outputs AC 380V power, the 380V equipment works.
2) Press button "OFF" of the receiver, receiver stops to output AC 380V power, the 380V equipment stops to work.