Package Include:
1 x Receiver: S1UW-AC-ANT3
1 x Transmitter: CC-2V-AC
1 x User manual
Working Principle:
Transmitter CC-2V-AC is a special remote control with AC voltage signal trigger. It has 2 input wires for connecting an AC voltage signal from an equipment, such as warning host, detector, sensor, Programmable Logic Controller (PLC), AC siren, AC light or other AC equipments.
When the two wires of the transmitter CC-2V-AC are supplied with AC voltage 100~240V, the transmitter automatically emit an wireless RF signal "ON". When the receiver receives this signal, the relay on the receiver is activated, thereby turning on the device connected to the receiver.
When the two wires of the transmitter CC-2V-AC stop receiving AC voltage 100~240V, the transmitter automatically emit an wireless RF signal "OFF". When the receiver receives this signal, the relay on the receiver is deactivated, thereby turning off the device connected to the receiver.
Application:
For long range control AC or DC electrical equipment, such as lamp, lights, LED lighting, motor, fan, pump, solenoid valves, door lock, heater, etc.
Feature:
Wireless remote control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors
Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors, or windows, but it will lose some operating range.
The receiver has reverse voltage protection and overcurrent protection.
The receiver can only be triggered by paired transmitters.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Feedback Function:
The receiver and the transmitter have a Two-way working mode, so the user can know the working status of the receiver by the transmitter.
Two-way working mode: When the receiver is successfully triggered by the signal from the transmitter, it will immediately transmit a feedback signal to the transmitter, then the transmitter will send out a buzzing sound to inform you that the receiver has been successfully triggered.
Receiver Parameters:
Model No.: S1UW-AC
Operating Voltage: AC100~240V (110V/120V/220V/240V)
Output Type: Dry Relays Output (Normally Open and Normally Closed)
Channel: 1 CH
Control Mode: Interlocking
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 10A
Working Frequency: 433.92 MHz
Wire Range of Terminals: 22-12 AWG
Operating Temperature: -20°C ~ +70°C
PCB size: 88 x 80 x 18 mm
Case size: 153 x 90 x 55 mm
Transmitter Parameters:
Model No.: CC-2V-AC
With 2 input wires
Triggered by 100~240V AC voltage signal.
Triggering method: When input wires get AC voltage signal, it will send wireless signal "ON". When input wires lose AC voltage signal, it will send wireless signal "OFF".
With two buttons: red button and black button
Operating Voltage: 12V (12V Rechargeable Lithium Battery)
Static Current: 3mA
Operating Current: 50~80mA
Operating Frequency: 433.92 MHz
Modulation Mode: FSK + LORA
Feedback indication: buzzing sound
Transmitting Distance: 5000 meters / 15000 feet (theoretically)
It has an power switch on the side.
Unit Size: 178 x 120 x 60 mm
Working Range:
The maximum working distance can reach 5000 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
Wiring:
1. Connect device with AC voltage (100~240V) signal to the input wires of the transmitter CC-2V-AC.
2. Connect AC power supply to the receiver's input terminals "L/+" and "N/-".
3. Connect the controlled device to the output terminals of the receiver.
3-1. If you want to control a DC equipment, do as following:
3-1-1) Connect the positive pole of the DC power supply to the terminal "NO" on the receiver;
3-1-2) Connect the negative pole of the DC power supply to the negative pole of DC equipment;
3-1-3) Connect the positive pole of the DC equipment to the terminal "COM" on the receiver.
3-2. If you want to control a AC equipment, do as following:
3-2-1) Connect the live wire of AC power supply to the terminal "NO" on the receiver;
3-2-2) Connect the neutral wire of AC power supply to one side of AC equipment;
3-2-3) Connect another side of AC AC equipment to the terminal "COM" on the receiver.
Operation:
1. By buttons of the transmitter CC-2V-AC:
Press the red button of the transmitter CC-2V-AC: The relay in the receiver is activated, and the connected device is working.
Press the black button of the transmitter CC-2V-AC: The relay in the receiver is deactivated, and the connected device has stopped working.
2. By input trigger terminals of the transmitter CC-2V-AC:
When the two wires of the transmitter CC-2V-AC are supplied with AC voltage 100~240V, the transmitter automatically emit an wireless RF signal "ON". When the receiver receives this signal, the relay on the receiver is activated, thereby turning on the device connected to the receiver.
When the two wires of the transmitter CC-2V-AC stop receiving AC voltage 100~240V, the transmitter automatically emit an wireless RF signal "OFF". When the receiver receives this signal, the relay on the receiver is deactivated, thereby turning off the device connected to the receiver.