DC Power 8 Channel Wireless Remote Control Receiver and 8 Transmitters (Model: 0020294)

Regular price $78.00

Shipping calculated at checkout.

This remote control switch kit is 8 single-button transmitters long range control a 8 channel DC 9V 12V 24V wireless receiver.

Application:
This kit may be used in all types of industry automation, agriculture, home, factory, house, farm, vehicle, ship, offshore operations, etc. It can long distance remote control DC and AC equipments on land, water and air, such as long range remote control lights, lamp, sirens, locks, motors, pumps, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs, etc.

Feature:
Wireless control, easy to install.
Power Supply: 3 working voltage versions, DC 9V, 12V, 24V.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.

Receiver Parameters:
Model No.: S8CA-DC09 / S8CA-DC12 / S8CA-DC24
Power Supply (Operating Voltage): DC12V±1V (S8CA-DC12), DC9V±1V (S8CA-DC09), DC24V±1V (S8CA-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Channel: 8 way
Control Modes: Self-locking, Momentary, Interlocking and mixed modes
Static Current: ≤6mA
Maximum Working Current: 5A / each channel
Wire range for the terminals: 22-18 AWG
Working Frequency: 433.92MHz
Operating Temperature: -20 ° C to +70 ° C
PCB size: 94mm x 73mm x 21mm
Case size: 100mm x 80mm x 28mm

Transmitter Parameters:
Model No.: 0021000 (C-1)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 1
Button Symbol: no symbol
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433MHz
Transmitting Distance: 100 meters / 300ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 58mm x 39mm x 16mm

Working Range:
With a transmitter (such as C-1) to form a complete set, the maximum working distance can reach 100 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you need a longer working distance, you can replace the antenna on the receiver, or use an RF signal repeater, or use a powerful transmitter, such as CB-1 transmitter.

Setting different control modes:
1) Learning Self-locking control mode: When the receiver is in the status of LEARNING, press button of the remote control 1.
Control mode Self-locking (Channel 1~8): Press -> On; Press again -> Off.

Press button of remote control 1: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on.
Press button of remote control 1 again: The relay 1 is deactivated, and the connected lamp 1 is turned off.
Press button of remote control 2: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on.
Press button of remote control 2 again: The relay 2 is deactivated, and the connected lamp 2 is turned off.
...
Press button of remote control 8: The relay 8 in the receiver is activated, and the connected lamp 8 is turned on.
Press button of remote control 8 again: The relay 8 is deactivated, and the connected lamp 8 is turned off.

2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button of the remote control 2.
Control mode Momentary (Channel 1~8): Press and hold -> On; Release -> Off.

Press and hold button of remote control 1: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on.
Release button of remote control 1: The relay 1 is deactivated, and the connected lamp 1 is turned off.
Press and hold button of remote control 2: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on.
Release button of remote control 2: The relay 2 is deactivated, and the connected lamp 2 is turned off.
...
Press and hold button of remote control 8: The relay 8 in the receiver is activated, and the connected lamp 8 is turned on.
Release button of remote control 8: The relay 8 is deactivated, and the connected lamp 8 is turned off.

3) Learning Interlocking control mode: When the receiver is in the status of LEARNING, press button of the remote control 3.
Control mode Interlocking (Channel 1~8): Press -> On, other relays Off; Press other button -> Off.

Press button of remote control 1: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on; Other 7 relay are deactivated, and connected lamps are turned off.
Press button of remote control 2: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on; Other 7 relay are deactivated, and connected lamps are turned off.
...
Press button of remote control 8: The relay 8 in the receiver is activated, and the connected lamp 8 is turned on; Other 7 relay are deactivated, and connected lamps are turned off.

4) Learning Self-locking (Channel 1~4) + Momentary (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button of the remote control 4

5) Learning Self-locking (Channel 1~4) + Interlocking (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button of the remote control 5

6) Learning Momentary (Channel 1~4) + Interlocking (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button of the remote control 6

7) Learning Interlocking (Channel 1~4 interlocked; Channel 5~8 interlocked) control mode: When the receiver is in the status of LEARNING, press button of the remote control 7

8) Learning Self-locking control mode (Channel 1~6) + All On / Off (Channel 7/8): When the receiver is in the status of LEARNING, press button of the remote control 8
Press button 7: Turn on all 8 relays
Press button 8: Turn off all 8 relays

Package Include:
1 x Receiver: S8CA-DC-ANT3
8 x Transmitter: C-1
1 x User manual