12 Transmitters Remote Control a 12 Channel Wireless Switch (Model: 0020192)

Regular price $95.00

Shipping calculated at checkout.

This remote control switch kit is 12 single-button transmitters long range control a 12 channel DC 9V 12V 24V wireless receiver.

Application:
This kit may be used in all types of industry automation, agriculture, home, factory, house, farm, vehicle, ship, offshore operations, etc. It can long distance remote control DC and AC equipments on land, water and air, such as long range remote control lights, lamp, sirens, locks, motors, pumps, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs, etc.

Feature:
Wireless control, easy to install.
Power Supply: 3 working voltage versions, DC 9V, 12V, 24V.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.

Receiver Parameters:
Model No.: S12CA-DC09 / S12CA-DC12 / S12CA-DC24
Power Supply (Operating Voltage): DC12V±1V (S12CA-DC12), DC9V±1V (S12CA-DC09), DC24V±1V (S12CA-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-18 AWG
Working Frequency: 433.92MHz
Channel: 12 way
Control Modes: Self-locking, Momentary, Interlocking and mixed modes
Static Current: ≤6mA
Maximum Working Current: 5A / each channel
Operating Temperature: -20 ° C to +70 ° C
PCB size: 94mm x 73mm x 21mm
Case size: 100mm x 80mm x 28mm

Transmitter Parameters:
Model No.: 0021000 (C-1)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 1
Button Symbol: no symbol
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433MHz
Transmitting Distance: 100m / 300ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 58mm x 39mm x 16mm

Working Range:
With a transmitter (such as C-1) to form a complete set, the maximum working distance can reach 100 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can replace external antenna of the receiver or use a high-power transmitter, such as CB-1 transmitter.

Setting different control modes:
1) Learning Self-locking control mode: When the receiver is in the status of LEARNING, press button of remote control 1.
Control mode Self-locking (Channel 1~12): Press -> On; Press again -> Off.
Press the button of transmitter 1: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on.
Press the button of transmitter 1 again: The relay 1 is deactivated, and the connected lamp 1 is turned off.
Press the button of transmitter 2: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on.
Press the button of transmitter 2 again: The relay 2 is deactivated, and the connected lamp 2 is turned off.
...
Press the button of transmitter 12: The relay 12 in the receiver is activated, and the connected lamp 12 is turned on.
Press the button of transmitter 12 again: The relay 12 is deactivated, and the connected lamp 12 is turned off.

2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button of remote control 2.

Control mode Momentary (Channel 1~12): Press and hold -> On; Release -> Off.
Press and hold the button of transmitter 1: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on.
Release the button of transmitter 1: The relay 1 is deactivated, and the connected lamp 1 is turned off.
Press and hold the button of transmitter 2: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on.
Release the button of transmitter 2: The relay 2 is deactivated, and the connected lamp 2 is turned off.
...
Press and hold the button of transmitter 12: The relay 12 in the receiver is activated, and the connected lamp 12 is turned on.
Release the button of transmitter 12: The relay 12 is deactivated, and the connected lamp 12 is turned off.

3) Learning Interlocking control mode: When the receiver is in the status of LEARNING, press button of remote control 3.
Control mode Interlocking (Channel 1~12): Press -> On, other relays Off; Press other button -> Off.
Press the button of transmitter 1: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on; Other 11 relay are deactivated, and connected lamps are turned off.
Press the button of transmitter 2: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on; Other 11 relay are deactivated, and connected lamps are turned off.
...
Press the button of transmitter 12: The relay 12 in the receiver is activated, and the connected lamp 12 is turned on; Other 11 relay are deactivated, and connected lamps are turned off.

4) Learning Self-locking (Channel 1~4) + Momentary (Channel 5~8) + Interlocking (Channel 9~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 4.

5) Learning Self-locking (Channel 1~6) + Momentary (Channel 7~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 5.

6) Learning Self-locking (Channel 1~6) + Interlocking (Channel 7~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 6.

7) Learning Momentary (Channel 1~6) + Interlocking (Channel 7~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 7.

8) Learning Interlocking (Channel 1~4 interlocked; Channel 5~8 interlocked; Channel 9~12 interlocked) control mode: When the receiver is in the status of LEARNING, press button of remote control 8.

9) Learning Self-locking (Channel 1~10) + Momentary (Channel 11~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 9.

10) Learning Self-locking (Channel 1~4) + Momentary (Channel 5~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 10.

11) Learning Self-locking (Channel 1~4) + Interlocking (Channel 5~12) control mode: When the receiver is in the status of LEARNING, press button of remote control 11.

12) Learning Self-locking control mode (Channel 1~10) + All On / Off (Channel 11/12): When the receiver is in the status of LEARNING, press button of remote control 12.
Press button 11: Turn on all 12 relays
Press button 12: Turn off all 12 relays

Package Include:
1 x Receiver: S12CA-DC-ANT3
12 x Transmitter: C-1
1 x User manual