Stroke 12 in DC 12V 24V Heavy Duty Electric Linear Actuator 1800 Ib (Model: 0041543)

Note:
1) This product does not contain a mounting brackets. If needed, please click here to buy.
2) If you need DC power supply for linear actuator, please click here to choose and buy.
3) If you need external limit switch for linear actuator, please click here to choose and buy.
4) If you need manual control switch for linear actuator, please click here to choose and buy.
5) If you need wireless remote control switch kit for linear actuator, please click here to buy.

Application:
Mainly used for doors, windows, cellars, trapdoors, hatchways, solar tracking system, medical devices, agricultural machinery, vehicles, ships, elevator platforms, lifting tables, TV lifts, robots, cabinetries, massage sofas, electric beds, medical chairs, and other electrical equipment. It can open, close, push, pull, lift, and descend these devices.
It can replace hydraulic and pneumatic products to save power consumption.

Feature:
High-quality products and high-quality services
Metal housing, able to work in very harsh environments
Metal gearbox and high strength wear-resistant metal gears
Stainless steel telescopic tube and outer tube, good corrosion resistant
Heavy duty design, high-power DC motor
Advanced waterproof and dustproof technology
Low power consumption and low noise
Built-in clutch to protect gears and motors
Built-in motor overload and overheat protection
Built-in two limit switches, linear actuator will automatically stop when stroke rod reaches the limit position.
With auto-locking capability to hold load position after stopping, and no power supply is required.
Maintenance-free

Specifications:
Optional working voltage: DC 12V, DC 24V, DC 36V or DC 48V
Stroke range: 12 in or 300 mm
Center distance between two mounting holes when the linear actuator is fully retracted: 550 mm
Center distance between two mounting holes when the linear actuator is fully extended: 850 mm
Optional speed: 5±1mm/s, 8±2mm/s, 10±2mm/s, 12±2mm/s, 16±3mm/s, 20±4mm/s, 28±6mm/s, 50±10mm/s
The above is the speed at no load, and the actual working speed will gradually slow down as the load increases.
Max Load capacity: 8000N / 800 Kgs / 1800 lbs at 5mm/s
Linear actuator can get maximum load capacity when it operates in the vertical direction, and the pulling force is less than pushing force.
No-load current: 2~3A at 12V or 1~1.5A at 24V
Full load current: 12~20A at 12V or 6~10A at 24V
Please use a 12V 20A or 24V 10A power supply to power a linear actuator, or use a 12V 50A or 24V 25A power supply to power two linear actuators, or use a 12V 84A or 24V 42A power supply to power three or four linear actuators.
Shaft diameter: 28mm
The diameter of the mounting holes for the front and rear connectors: 13mm [0.512 in] 
Housing Material: Stainless steel
Stroke Rod Material: Stainless steel
Gear Material: Steel Alloy
Motor Type: Brushed DC Motor
Duty cycle: 10%, max 5mins continuous use
Service life: approx. 35, 000 cycles
Cable length of the normal linear actuator: 600±10%mm [24 in]
Certifications: CE
Environment temperature: -26℃ to 85℃
Operating Noise: about 56dB~66dB
IP rating: IP65

Production Time and Return or Exchange Policy
The linear actuators are customized and not in stock, and we need to spend 3~7 working days to produce them according to the specified parameters in your order, so that we don't accept returns or cancel orders. If customers order unsuitable linear actuators themselves, we also do not accept exchanges, please understand.