2 Way DC Power Output Wireless RF Switch Receiver 16000 Feet (Model: 0020141)

Regular price $65.00

Shipping calculated at checkout.

Note: This product does not include a remote control or transmitter, if you need it, please click the link of the remote control or transmitter in the description below to buy.

Package Include:
1 x Receiver: S2XW-DC-ANT3
1 x User manual

Introduction:
This receiver is a super long range remote switch. It is developed by LORA (Long Range) wireless communication technology, so it has ultra-long working distance, ultra-high receiving sensitivity, superior anti-interference ability, and smaller power consumption. It uses a transceiver chip to implement bidirectional communication. Its ideal working distance is up to 5 kilometers, which is an excellent device for remote control and long-distance communication.

Application:
It may be used in all types of industry automation, agriculture, home, factory, house, farm, vehicle, ship, offshore operations, etc. It can long range remote control DC electric equipments, such as remote control lights, lamp, fans, pump, locks, motors, solenoid valves, Solar light, etc.

Feature:
Wireless control, easy to install.
Super long working range: With the transmitter forming a complete set, the maximum working distance may reach 5000 meters in an open area.
Waterproof: The receiver has waterproof case and waterproof connector; it can be installed outdoors.
Four operating voltage versions: DC 6V, 9V, 12V, 24V optional.
DC Power Output: It can control DC equipment with voltage DC 6V / 9V / 12V / 24V.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
Wireless RF signal from the transmitter can pass through walls, floors, doors, or windows, but it will lose some operating range.
The receiver has reverse voltage protection and overcurrent protection.
The receiver can only be triggered by paired transmitters.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.

Feedback Function:
The receiver and the transmitter have a Two-way working mode, so the user can know the working status of the receiver by the transmitter.
Two-way working mode: When the receiver is successfully triggered by the signal from the transmitter, it will immediately transmit a feedback signal to the transmitter. When the transmitter receives this signal, it will send out a buzzing sound to inform you that the receiver has been successfully triggered.

Receiver Parameters:
Model: S2XW-DC-ANT3
Operating Voltage: 6VDC (model S2XW-DC06), or 9±1VDC (model S2XW-DC09), or 12±1VDC (model S2XW-DC12), or 24±2VDC (model S2XW-DC24), the operating voltage must be specified when ordering.
Working Frequency: 433.92 MHz
Quiescent Current: ≤6mA
Channel: 2 CH
Output Type: DC power output
Maximum Load Current of Relay: 10A / channel
Suitable Wires for Connecting Terminals: 22-12 AWG
3 Selectable Working Modes: Self-locking, Momentary, Interlocking
Operating Temperature: -20 °C ~ +70 °C
PCB size: 88 x 80 x 18 mm (3.5 x 3.1 x 0.7 inches)
Case size: 115 x 90 x 55 mm (4.5 x 3.6 x 2.2 inches)

Matching Transmitters:
This receiver only works with 5000 meters transmitters, such as model CC-2 (5000 meters/15000 ft range), or CCW-2 (waterproof, 5000 meters/15000 ft range).

Super Long Working Range:
The receiver and the transmitter form a wireless remote control switch, the maximum working distance may reach 15000 feet or 5000 meters in an open area.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no interference. But in the practice, it will be hindered by trees, walls or other construction, and will be interfered by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.

Usage:
The receiver can be used to control DC 6V / 9V / 12V / 24V devices.If the power supply of those equipments is DC 12V, you should choose the receiver with same DC 12V version; and if the power supply of those equipments is DC 24V, you should choose the receiver with same DC 24V version.

Wiring:
1) Connect the positive pole of DC power supply to input terminal “L/+” of the receiver;
2) Connect the negative pole of DC power supply to input terminal “N/-” of the receiver;
3) Connect the positive pole of DC device to output terminal “L/+” of the receiver;
4) Connect the negative pole of DC device to output terminal “N/-” of the receiver.

Setting different control modes:
1) Setting Self-locking mode: Turn on the third bit of the dip switch.
The operation of Self-locking mode with the transmitter CC-2:
Press button A of the transmitter: The terminals "OUT1" of the receiver outputs DC power, and the connected lamp 1 is turned on.
Press button A again: The terminals "OUT1" of the receiver stops outputting, and the connected lamp 1 is turned off.
Press button B of the transmitter: The terminals "OUT2" of the receiver outputs DC power, and the connected lamp 2 is turned on.
Press button B again: The terminals "OUT2" of the receiver stops outputting, and the connected lamp 2 is turned off.

2) Setting Momentary mode: Turn off the second bit and the third bit of the dip switch.
The operation of Momentary mode with the transmitter CC-2:
Press and hold button A of the transmitter: The terminals "OUT1" of the receiver outputs DC power, and the connected lamp 1 is turned on.
Release button A: The terminals "OUT1" of the receiver stops outputting, and the connected lamp 1 is turned off.
Press and hold button B of the transmitter: The terminals "OUT2" of the receiver outputs DC power, and the connected lamp 2 is turned on.
Release button B: The terminals "OUT2" of the receiver stops outputting, and the connected lamp 2 is turned off.

3) Setting Interlocking mode: Turn on the second bit of the dip switch.
The operation of Interlocking mode with the transmitter CC-2:
Press button A of the transmitter: The terminals "OUT1" of the receiver outputs DC power, and the connected lamp 1 is turned on; The terminals "OUT2" of the receiver stops outputting, and the connected lamp 2 is turned off.
Press button B of the transmitter: The terminals "OUT2" of the receiver outputs DC power, and the connected lamp 2 is turned on.; The terminals "OUT1" of the receiver stops outputting, and the connected lamp 1 is turned off.

How to set the feedback function:
You can turn on the fourth bit of the dip switch to activate the feedback function; or turn off the fourth bit to deactivate the feedback function.
Attention: The first bit of the DIP switch on the receiver needs to be set to the ON position.