Package Include:
1 x Receiver: S1PUW-AC-ANT3
1 x Transmitter: CC-2N
1 x User manual
Working Principle:
Transmitter CC-2N is a special remote control with normally open contact trigger. It has 2 input terminals for connecting a device with normally open contact, such as button, switch, detector, sensor, limit switch, Programmable Logic Controllers and so on.
When the two input terminals of the transmitter CC-2N are connected, the transmitter automatically emit an wireless RF signal "ON". When the receiver receives this signal, the relay in the receiver is activated, thereby turning on the device connected to the receiver.
When the two input terminals of the transmitter CC-2N are disconnected, the transmitter automatically emit an wireless RF signal "OFF". When the receiver receives this signal, the relay in the receiver is deactivated, thereby turning off the device connected to the receiver.
Application:
For long range turn on and off AC or DC electrical equipment, such as lamp, lights, LED lighting, motor, fan, pump, solenoid valves, door lock, heater, etc.
Feature:
Wireless control, easy to install.
Super long working range: With the transmitter forming a complete set, the maximum working distance may reach 5000 meters in an open area.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Feedback function:
The receiver and the transmitter have a Two-way working mode, and the user can know the working status of receiver by the transmitter in such a long distance.
Two-way working mode: When you press the transmitter to send RF signal to the receiver, if the receiver has been successfully triggered or operated, the receiver will immediately transmit a RF feedback signal to the transmitter. Then the transmitter will send out a buzzing sound to inform you that the receiver has been successfully operated.
Transmitter Parameters:
Model No.: CC-2N
With 2 trigger terminals
Triggering method: When 2 input terminals are connected, it will send wireless signal "ON". When 2 input terminals are disconnected, it will send wireless signal "OFF".
With two buttons: red button and black button
Operating Voltage: 12V (12V Rechargeable Lithium Battery)
Static Current: 3mA
Operating Current: 50~80mA
Operating Frequency: 433.92 MHz
Modulation Mode: FSK + LORA
Feedback indication: buzzing sound
Transmitting Distance: 5000 meters / 15000 feet (theoretically)
It has an power switch on the side.
Unit Size: 178 x 120 x 60 mm
Receiver Parameters:
Model No.: S1PUW-AC-ANT3
Operating Voltage: AC100~240V (110V/120V/220V/240V)
Output Type: Dry Relays Output (Normally Open and Normally Closed)
Maximum Load Voltage of Relay: 240VAC or 28VDC
Maximum Load Current of Relay: 30A
Quiescent Current: ≤6mA
Channel: 1 CH
Control Mode: Interlocking
Working Frequency: 433.92 MHz
Wire Range of Terminals: 22-12AWG
Operating Temperature: -20°C ~ +70°C
PCB size: 88 x 80 x 18 mm
Case size: 153 x 90 x 55 mm
Working Range:
The maximum working distance can reach 5000 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
Wiring:
1. Connect the normally open contact device to the input trigger terminals of the transmitter CC-2N.
2. Connect AC power supply to the receiver's input terminals "L/+" and "N/-".
3. Connect the controlled device to the output terminals of the receiver.
3-1. If you want to control a DC equipment, do as following:
3-1-1) Connect the positive pole of the DC power supply to the terminal "NO" on the receiver;
3-1-2) Connect the negative pole of the DC power supply to the negative pole of DC equipment;
3-1-3) Connect the positive pole of the DC equipment to the terminal "COM" on the receiver.
3-2. If you want to control a AC equipment, do as following:
3-2-1) Connect the live wire of AC power supply to the terminal "NO" on the receiver;
3-2-2) Connect the neutral wire of AC power supply to one side of AC equipment;
3-2-3) Connect another side of AC AC equipment to the terminal "COM" on the receiver.
Operation:
1. By buttons of the transmitter CC-2N:
Press the red button of the transmitter CC-2N: The relay in the receiver is activated, and the connected device is working.
Press the black button of the transmitter CC-2N: The relay in the receiver is deactivated, and the connected device has stopped working.
2. By input trigger terminals of the transmitter CC-2N:
When the two input terminals of the transmitter CC-2N are connected, the transmitter automatically emit an wireless RF signal "ON". When the receiver receives this signal, the relay in the receiver is activated, thereby turning on the device connected to the receiver.
When the two input terminals of the transmitter CC-2N are disconnected, the transmitter automatically emit an wireless RF signal "OFF". When the receiver receives this signal, the relay in the receiver is deactivated, thereby turning off the device connected to the receiver.