Package Include:
1 x Receiver: S2PXW-DC-ANT3
1 x User manual
Application:
For long range wireless remote control DC equipments, such as lamp, LED lighting, motor, solenoid valve, pump, electric lock, etc.
Feature:
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector; it can be installed outdoors.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
Wireless RF signal from the transmitter can pass through walls, floors, doors, or windows, but it will lose some operating range.
The receiver has reverse voltage protection and overcurrent protection.
The receiver can only be triggered by paired transmitters.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Feedback Function:
The receiver and the transmitter have a Two-way working mode, so the user can know the working status of the receiver by the transmitter.
Two-way working mode: When the receiver is successfully triggered by the signal from the transmitter, it will immediately transmit a feedback signal to the transmitter. When the transmitter receives this signal, it will send out a buzzing sound to inform you that the receiver has been successfully triggered.
Receiver Parameters:
Model No.: S2PXW-DC-ANT3
Operating Voltage: Compatible with DC 10V~80V
Output Type: DC power supply output, same as input voltage.
Quiescent Current: ā¤6mA
Maximum Load Current of Relay: 30A / CH
Channel: 2 Way
3 Selectable Modes: Self-locking, Momentary, Interlocking
Working Frequency: 433.92 MHz
PCB size: 88 x 80 x 18 mm
Case size: 153 x 90 x 55 mm
Applicable Transmitters:
The receiver only works with 5000 meters transmitters, such as modelĀ CC-2 (5 km / 3 mi range)Ā andĀ CCW-2 (waterproof, 5 km / 3 mi range).
Working Range:
With the transmitter (such as CC-2) forming a complete set, the max working distance may reach 5 km in an open area.
The max working distance is based on theoretical data which would be without barriers and without any RF interference. In practice, it will be hindered by trees, walls or other construction, and will be interfered with by other wireless signals. Therefore, the actual working distance may not reach this max distance.
Usage:
The receiver can be used to control DC equipment with a voltage in the range of 10~80 VDC.
Wiring:
1) Connect the positive pole of the DC device to the output terminal "L/+" of the receiver;
2) Connect the negative pole of the DC device to the output terminal "N/-" of the receiver;
3) Connect the positive pole of the DC power supply to the input terminal "L/+" of the receiver;
4) Connect the negative pole of the DC power supply to the input terminal "N/-" of the receiver.
Setting different control modes:
1) Setting Self-locking mode: Turn on the third bit of the dip switch.
The operation of Self-locking mode with the transmitter CC-2:
Press the button A on the transmitter: The device connected to the receiver's output terminal "Output1" is turned on.
Press the button A again: The device connected to the receiver's output terminal "Output 1" is turned off.
Press the button B on the transmitter: The device connected to the receiver's output terminal "Output2" is turned on..
Press the button B again: The device connected to the receiver's output terminal "Output2" is turned off.
2) Setting Momentary mode: Turn off the second bit and the third bit of the dip switch.
The operation of Momentary mode with the transmitter CC-2:
Press and hold the button A on the transmitter: The device connected to the receiver's output terminal "Output1" is turned on.
Release the button A: The device connected to the receiver's output terminal "Output1" is turned off.
Press and hold the button B on the transmitter: The device connected to the receiver's output terminal "Output2" is turned on.
Release the button B: The device connected to the receiver's output terminal "Output2" is turned off.
3) Setting Interlocking mode: Turn on the second bit of the dip switch.
The operation of Interlocking mode with the transmitter CC-2:
Press the button A on the transmitter: The device connected to the receiver's output terminal "Output1" is turned on; The device connected to the receiver's output terminal "Output2" is turned off.
Press the button B on the transmitter: The device connected to the receiver's output terminal "Output2" is turned on; The device connected to the receiver's output terminal "Output1" is turned off.
How to set the feedback function:
You can turn on the fourth bit of the dip switch to activate the feedback function; or turn off the fourth bit to deactivate the feedback function.