Package Include:
4 x Receiver: S1PX-AC
1 x Transmitter: CV-4
1 x User manual
Application:
This is a single-phase 120V 220V high power 30A wireless remote control switch kit, a 4-button RF transmitter and four 1-channel AC input and output radio receivers.
For long range remote control AC electrical equipments, such as lamp, lights, LED lighting, motor, fan, pump, solenoid valves, door lock, heater, etc.
Feature:
Wireless remote control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.
AC Power Output: It can control AC equipment with voltage AC 110V, 120V, 220V or 240V.
High Power: Each channel can work at maximum current 30A
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Receiver Parameters:
Model No.: S1PX-AC
Operating Voltage: Single-Phase 100~240VAC (110V/120V/220V/240V)
Output Type: 100~240VAC (110V/120V/220V/240V)
Channel: 1 CH
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 30A
Two control modes: Self-locking and Momentary
Working Frequency: 433.92 MHz
Wire Range of Terminals: 22-12AWG
Operating Temperature: -20°C ~ +70°C
PCB size: 90 x 59 x 18 mm (3.5 x 2.3 x 0.7 inches)
Case size: 100 x 68 x 50 mm (4.0 x 2.7 x 2.0 inches)
Transmitter Parameters:
Model No.: 0021018 (CV-4)
Channel/Button: 4
Button Symbol: 1, 2, 3, 4
Operating Voltage: 12V (1 x 23A -12V battery)
Operating Current: 15mA
Operating Frequency: 433MHz
Transmitting Distance: 500 meters / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 110mm x 50mm x 18mm
Matching Transmitters:
The receiver can work with different transmitters, such as model C-4 (100 meters), CP-4 (500 meters) CD -4 (1000 meters, waterproof, industrial), or CB -4 (1000 meters).
Working Range:
With a transmitter (such as CV-4) to form a complete set, the maximum working distance can reach 500 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you need a longer working distance, you can replace the antenna on the receiver, or use an RF signal repeater, or use a powerful transmitter, such as a CB-4 transmitter.
Usage:
The receiver can be used to control AC 110~240V equipments.
Wiring:
If you want to control single-phase AC 120V or 220V equipment, do as following:
1) Connect the live wire of AC power supply to input terminal “L/+” on the radio receiver;
2) Connect the neutral wire of AC power supply to input terminal “N/-” on the radio receiver;
3) Connect one side of AC device to output terminal “L/+” on the radio receiver;
4) Connect another side of AC device to output terminal “N/-” on the radio receiver.
Setting different control modes:
1) Setting Momentary mode: Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.
The operation of Momentary mode with the transmitter CV-4:
Press and hold the button 1 on the transmitter: The output terminals of the receiver 1 outputs AC power, and the connected lamp 1 is turned on.
Release the button 1: The output terminals of the receiver 1 stops outputting, and the connected lamp 1 is turned off.
Press and hold the button 2 on the transmitter: The output terminals of the receiver 2 outputs AC power, and the connected lamp 2 is turned on.
Release the button 2: The output terminals of the receiver 2 stops outputting, and the connected lamp 2 is turned off.
...
Press and hold the button 4 on the transmitter: The output terminals of the receiver 4 outputs AC power, and the connected lamp 4 is turned on.
Release the button 4: The output terminals of the receiver 4 stops outputting, and the connected lamp 4 is turned off.
2) Setting Self-locking mode: Press the learning button in the receiver 3 times, signal LED continuously flashes 3 times and then goes off.
The operation of Self-locking mode with the transmitter CV-4:
Press the button 1 on the transmitter: The output terminals of the receiver 1 outputs AC power, and the connected lamp 1 is turned on.
Press the button 1 again: The output terminals of the receiver 1 stops outputting, and the connected lamp 1 is turned off.
Press the button 2 on the transmitter: The output terminals of the receiver 2 outputs AC power, and the connected lamp 2 is turned on.
Press the button 2 again: The output terminals of the receiver 2 stops outputting, and the connected lamp 2 is turned off.
...
Press the button 4 on the transmitter: The output terminals of the receiver 4 outputs AC power, and the connected lamp 4 is turned on.
Press the button 4 again: The output terminals of the receiver 4 stops outputting, and the connected lamp 4 is turned off.