Pulse Width PWM DC Motor Speed Controller Wireless Remote Control Switch (Model: 0020151)

Regular price $75.00

Shipping calculated at checkout.
Package Include:
1 x Receiver: S1FA-DC
1 x transmitter: CP-6
1 x User manual

Application:
PWM RF Wireless Remote Control DC Motor Switch / Controller can be used in rolling blinds, rolling doors, projection screens, awnings, conveyors or other appliances and equipments with DC motors, it can remote control DC motor positive rotation or reverse rotation.

Features:
Wireless remote control, easy to install.
Wide operating voltage range: 12~30VDC
You can remote control DC motor positive rotation, reverse rotation or stop rotation with the transmitter from any place within a reliable distance.
You can adjustable about the speed of motor rotation by Knob on the receiver or button in transmitter.
You can connect two restrictive switches to receiver and use them to stop motor rotation.
You can also connect Optoelectronic switch, Proximity switches, Hall switch to receiver and use them to stop motor rotation.
You can connect a low level signal external device to receiver and use this device to start motor rotate in positive or reversal direction.
With reverse power protection and over current protection.
The RF wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use a 6-bit code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:
Model No: S1FA-DC
Operating Voltage: DC12V~30V
Working Frequency: 433.92 MHz
Rated Current: 4A
Maximum Rated Power for Brushed DC motors: 50 W for DC12V motor; 100W for DC 24Vmotor
The Maximum Instantaneous Current of Starting Motor: 8A
Wire range for the terminals: 22-14 AWG
Channel: 1 CH, can work with 1 DC motor
Operating Temperature: -20 ° C to +70 ° C
Case size: 115mm x 90mm x 40mm
Only work transmitters with 6 bit fixed code

Transmitter Parameters:
Model No.: CP-6
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Channel/Button: 6
Button Symbol: 1, 2, 3, 4, 5, 6
Operating Frequency: 433.92MHz
Modulation Mode: ASK
Encode: Fixed code by soldering
Remote Control Distance: 500m / 1500ft (theoretically)
Unit size: 85mm x 36mm x 16mm

Usage:
Operation (with transmitter CP-6):
Press button 1: Forward LED will on, terminal “Output” output DC power, motor rotates in positive direction.
Press button 2: Reverse LED will on, terminal “Output” output DC power, motor rotates in reversal direction.
Press button 3: Motor stop rotating, Forward LED or Reverse LED will off.
Press button 4: Motor rotation will speed up and Forward LED or Reverse LED will gradually brighten.
Button 5 is useless.
Press button 6: Motor rotation will slow down and Forward LED or Reverse LED will gradually darken.

Speed adjustment:
You can twist “Adjustable potentiometer” to adjust the speed of motor rotates in positive / reversal direction. Twist clockwise, motor rotation will speed up; Twist anti-clockwise, motor rotation will slow down.

Signal input:
Connect one external device with low voltage output signal to terminal “Signal -“, “Signal input 1” and terminal “Signal -“ ,“Signal input 2”, the external device’s output signal can start motor rotate in positive or reversal direction.
When the low voltage external device output signal to terminal “Signal -“, “Signal input 1”, motor rotates in positive direction.
When the low voltage external device output signal to terminal “Signal -“ ,“Signal input 2”, motor rotates in reversal direction.

Restrictive function:
1) You can connect two restrictive switches (Normally open type) to terminals “Sensor 1-“, “Limit input 1”, and terminals “Sensor 2-“, “Limit input 2”. When the rotation is overdone, if the restrictive switch S1 or S2 is activated, the motor will stop automatically. That means when motor rotates in positive direction, if you activate “S1“, motor will stop automatically; when motor rotates in reversal direction, if you activate “S2“, motor will stop automatically. You can connect according to below picture:

2) You can also connect optoelectronic switch, proximity switch, hall switch to terminals “Sensor 1-“, “Limit input 1”, “Sensor 1+”, and terminals “Sensor 2-“, “Limit input 2”, “Sensor 2+”, if the switch S1 or S2 is activated, the motor will stop automatically. That means when motor rotates in positive direction, if the switch S1 is activated, motor will stop automatically; when motor rotates in reversal direction, if he switch S2 is activated, motor will stop automatically. You can connect optoelectronic switch, proximity switch, hall switch according to below picture: