Package Include
1 x Receiver: S16C-DC-ANT3
1 x Transmitter: CV-16
1 x User manual
Application
For long range remote control AC DC electrical equipments, such as lamp, lights, LED lighting, motor, fan, pump, solenoid valves, door lock, etc.
Feature
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
Receiver
Model: S16C-DC12-ANT3 or S16C-DC24-ANT3
Power Supply (Operating Voltage): DC12V±1V (S16C-DC12-ANT3), DC24V±2V (S16C-DC24-ANT3)
Output Type: Relay output
Channel: 16 way
Control Modes: Self-locking, Momentary, Interlocking and mixed modes
Static Current: ≤6mA
Maximum Working Current: 5A / channel
Working Frequency: 433MHz
Operating Temperature: -20°C ~ +70°C
PCB size: 120 x 73 x 16 mm
Case size: 142 x 80 x 30 mm
Transmitter
Model No.: CV-16
Channel/Button: 16
Button Symbol: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
Operating Voltage: 12V (1 x 23A -12V battery)
Operating Frequency: 433MHz
Transmitting Distance: 500m / 1500ft (theoretically)
Modulation Mode: ASK
Unit Size: 110 x 50 x 18 mm
Working Range:
The kit has a maximum working distance of 500 meters in open areas.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can replace external antenna of the receiver.
Usage:
This receiver has three output terminals for each channel, "NC" for the NC terminal, "NO" for the NO terminal, and "COM" for the COM terminal.
Initial state of relay output terminals: Terminals “NO” and “COM” are Normally Open; Terminals “NC” and “COM” are Normally Closed.
Wiring for Wireless Switch Receiver, click here to learn more.
Setting different control modes (operation with transmitter CV-16):
1) Setting Self-locking mode: When the receiver is in the status of LEARNING, press button 1 of the transmitter.
Press the button 1 on the transmitter: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on.
Press the button 1 again: The relay 1 is deactivated, and the connected lamp 1 is turned off.
Press the button 2 on the transmitter: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on.
Press the button 2 again: The relay 2 is deactivated, and the connected lamp 2 is turned off.
...
Press the button 16 on the transmitter: The relay 16 in the receiver is activated, and the connected lamp 16 is turned on.
Press the button 16 again: The relay 16 is deactivated, and the connected lamp 16 is turned off.
2) Setting Momentary mode: When the receiver is in the status of LEARNING, press button 2 of the transmitter.
Press and hold the button 1 on the transmitter: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on.
Release the button 1: The relay 1 is deactivated, and the connected lamp 1 is turned off.
Press and hold the button 2 on the transmitter: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on.
Release the button 2: The relay 2 is deactivated, and the connected lamp 2 is turned off.
...
Press and hold the button 16 on the transmitter: The relay 16 in the receiver is activated, and the connected lamp 16 is turned on.
Release the button 16: The relay 16 is deactivated, and the connected lamp 16 is turned off.
3) Setting Interlocking mode: When the receiver is in the status of LEARNING, press button 3 of the transmitter.
Press the button 1 on the transmitter: The relay 1 in the receiver is activated, and the connected lamp 1 is turned on; Other 15 relay are deactivated, and connected lamps are turned off.
Press the button 2 on the transmitter: The relay 2 in the receiver is activated, and the connected lamp 2 is turned on; Other 15 relay are deactivated, and connected lamps are turned off.
...
Press the button 16 on the transmitter: The relay 16 in the receiver is activated, and the connected lamp 16 is turned on; Other 15 relay are deactivated, and connected lamps are turned off.
4) Learning Self-locking (Channel 1~8) + Momentary (Channel 9~16) control mode: When the receiver is in the status of LEARNING, press button 4 of the remote control.