Package Include:
1 x Receiver: S1PX-DC-ANT3
1 x Transmitter: CB-1 or CB-2
1 x User manual
Application:
This long distance 2000 meters 1 Channel high power 30A waterproof wireless remote control switch kit with DC 6V 9V 12V 24V input output radio receiver and RF transmitter.
This kit may be used in all types of industry automation, agriculture, home, factory, house, farm, vehicle, ship, offshore operations, etc. It can long range remote control DC equipments, such as lamp, light, solar light, LED lighting, fan, motor, pump, solenoid valve, door lock, gates, etc.
Feature:
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Four operating voltage versions: DC 6V, 9V, 12V, 24V optional.
DC Power Output: It can control DC equipment with voltage DC 6V, 9V, 12V or 24V.
High Power: Each channel can work at maximum current 30A
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Receiver Parameters:
Model No.: S1PX-DC
Power Supply (Operating Voltage): DC6V (S1PX-DC06), DC12V±1V (S1PX-DC12), DC9V±1V (S1PX-DC09), DC24V±1V (S1PX-DC24), the operating voltage must be specified when ordering.
Output: DC6V (S1PX-DC06), DC12V (S1PX-DC12), DC9V (S1PX-DC09), DC24V (S1PX-DC24)
Channel: 1 Way
3 Control Modes: Self-locking, Momentary, Interlocking
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 30A
Working Frequency: 433MHz
Wire Range of Terminals: 22-12AWG
Operating Temperature: -20°C ~ +70°C
PCB size: 90 x 59 x 18 mm (3.5 x 2.3 x 0.7 inches)
Case size: 100 x 68 x 50 mm (4.0 x 2.7 x 2.0 inches)
Transmitter Parameters:
Model No.: 0021023 (CB-1) / 0021024 (CB-2)
Channel/Button: 1 (CB-1) / 2 (CB-2)
Button Symbol: No symbol (CB-1) / A, B (CB-2)
Operating Voltage: 9V (1 x 6F22 -9V battery)
Operating Current: 30mA
Operating Frequency: 433.92MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Transmitting Distance: 1000 meters / 3000ft (theoretically)
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: Unit Size: 135 x 42 x 25 mm (5.3 x 1.7 x 1.0 inches)
Matching Transmitters:
The receiver can work with different transmitters.
When you set the receiver in Self-locking mode or Momentary mode, it should work with single button transmitter, such as model C-1 (100 meters / 300 feet range), CP-1 (500 meters / 1500 feet range), or CB-1 (1000 meters / 3000 feet range).
When you set the receiver in Interlocking mode, it should work with two buttons transmitter, such as model C-2 (100 meters / 300 feet range), CP-2 (500 meters / 1500 feet range), CD-2 (Industrial, 1000 meters / 3000 feet range), or CB-2 (1000 meters / 3000 feet range).
Working Range:
With a transmitter (such as CB-2) to form a complete set, the maximum working distance can reach 2000 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you need a longer working distance, you can replace the antenna on the receiver, or use an RF signal repeater.
Usage:
The receiver can be used to control DC 6V / 9V / 12V / 24V equipments. If the power supply of those equipments is DC 12V, you should choose the receiver with same DC 12V version; and if the power supply of those equipments is DC 24V, you should choose the receiver with same DC 24V version.
Wiring:
If you want to control a DC lamp, do as following:
1) Connect the positive pole of DC power supply to input terminal “L/+” of the receiver;
2) Connect the negative pole of DC power supply to input terminal “N/-” of the receiver;
3) Connect the positive pole of DC lamp to output terminal “L/+” of the receiver;
4) Connect the negative pole of DC lamp to output terminal “N/-” of the receiver;
Setting different control modes:
1) Setting Momentary mode (work with transmitter CB-1): Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.
Press and hold button of the transmitter: The output terminals of the receiver outputs DC power, and the connected light is turned on.
Release the button of the transmitter: The output terminals of the receiver stops outputting DC power, and the connected light is turned off.
2) Setting Self-locking mode (work with transmitter CB-1): Press the learning button in the receiver 3 times, signal LED continuously flashes 3 times and then goes off.
Press button of the transmitter: The output terminals of the receiver outputs DC power, and the connected light is turned on.
Press the button of the transmitter again: The output terminals of the receiver stops outputting DC power, and the connected light is turned off.
3) Setting Interlocking mode (work with transmitter CB-2): Press the learning button in the receiver 4 times, signal LED continuously flashes 4 times and then goes off.
Press button A of the transmitter: The output terminals of the receiver outputs DC power, and the connected light is turned on.
Press button B of the transmitter: The output terminals of the receiver stops outputting DC power, and the connected light is turned off.