85~250V 15A 1CH Wireless ON/OFF Switch and RF Transmitter (Model: 0020031)

Regular price $41.40

Shipping calculated at checkout.

Package Include
1 x Receiver: S1PXA-AC
1 x Transmitter: CQ-2
1 x User manual

Application
For long range wireless remote control on and off AC electrical equipment, such as lamp, light, LED lighting, motor, pump, solenoid valve, heater, socket/outlet, etc.

Feature
With 10 seconds delay function.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.

Receiver
Model: S1PXA-AC
Operating Voltage: Compatible with AC 85~250V
Output Type: AC power output, same as input voltage.
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 15A
Channel: 1 CH
4 Selectable Working Modes: Self-locking, Momentary, Interlocking, Delay
Working Frequency: 433MHz
Operating Temperature: -20 °C ~ +70 °C
PCB size: 90 x 47 x 23 mm
Case size: 96 x 50 x 33 mm

Transmitter
Model: CQ-2
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 6V (2 x CR2016 -3V button cell batteries)
Operating Frequency: 433MHz
Transmitting Distance: 50 meters / 150ft (theoretically)
Modulation Mode: ASK
Unit Size: 60 x 31 x 11 mm

Applicable Transmitters
The receiver can work with different transmitters. such as model C-2 (100m / 300ft), CP-2 (500m / 1500ft), CD-2 (Industrial, 1000m / 3000ft), and CB-2 (1000m / 3000ft).

Working Range
This receiver and different transmitters form a complete set, which can achieve different working distances. For example, when it and the transmitter CQ-2 form a complete set, the maximum working distance may reach 150 feet or 50 meters in an open area.
The maximum working distance is based on theoretical data without obstacles and any RF interference. In practice, it will be hindered by trees, walls, or other construction, and will be interfered with by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.
If you need a longer working distance, you can use a powerful transmitter, such as a CB-1/ CD-2/CB-2 transmitter.

Setting different control modes
1) Setting Self-locking mode: Press and hold the learning button on the receiver until signal LED flashes 3 times, then release the button.
The operation of Self-locking mode with the transmitter CQ-2:
Press the button A of the transmitter: The output terminals of the receiver outputs AC power, and the connected lamp is turned on.
Press the button A again: The output terminals of the receiver stops outputting AC power, and the connected lamp is turned off.

2) Setting Momentary mode: Press and hold the learning button on the receiver until signal LED flashes 2 times, then release the button.
The operation of Momentary mode with the transmitter CQ-2:
Press and hold the button A of the transmitter: The output terminals of the receiver outputs AC power, and the connected lamp is turned on.
Release the button A: The output terminals of the receiver stops outputting AC power, and the connected lamp is turned off.

3) Setting Interlocking mode: Press and hold the learning button on the receiver until signal LED flashes 1 time, then release the button.
The operation of Interlocking mode with the transmitter CQ-2:
Press the button A of the transmitter: The output terminals of the receiver outputs AC power, and the connected lamp is turned on.
Press the button B of the transmitter: The output terminals of the receiver stops outputting AC power, and the connected lamp is turned off.

4) Setting 10-seconds Delay mode: Press and hold the learning button on the receiver until signal LED flashes 4 time, then release the button.
The operation of Delay mode with the transmitter CQ-2:
Press the button A of the transmitter: The output terminals of the receiver outputs AC power, and the connected lamp is turned on.
After 10 seconds: The output terminals of the receiver automatically stops outputting AC power, and the connected lamp is automatically turned off.
During the 10 seconds, you can also press the learning button for 1-2 seconds to immediately stop outputting AC power and turn off the connected lamp.