Package Include:
1 x Heavy Duty Linear Actuator C
1 x Receiver: S1PF-DC24
1 x Transmitter: CP-3
2 x Fixing Brackets B
1 x User manual
The information for electric linear actuator
Application:The DC 24V 800Kg 8000N 1800lbs heavy duty electric linear actuator can open, close, push, pull, lift and descend other devices. Such as doors, windows, solar tracking system, medical devices, agricultural machinery, vehicles, ships, elevator platforms, lifting tables, TV lifts, robots, cabinetries, massage sofas, electric beds, medical chairs, etc.
It can replace hydraulic and pneumatic products to save power consumption.
Feature:
High-quality products and high-quality services
Metal housing, able to work in very harsh environments
Metal gearbox, high strength wear-resistant gear
Stainless steel telescopic tube and outer tube, good corrosion resistant
Heavy duty design, high-power DC motor
Strong thrust, up to 8000N / 800 Kgs / 1800 lbs
Multiple speed options, from 5 mm/second to 60 mm/second
Advanced waterproof and dustproof technology
Low power consumption and low noise
Built-in clutch to protect gears and motors
Built-in motor overload and overheat protection
Built-in two limit switches, linear actuator will automatically stop when stroke rod reaches the limit position.
Automatically lock after stopping, and no power supply is required.
Maintenance-free
Specifications:
Optional working voltage: DC 24V
Stroke range: 4 inches(50mm) ~ 40 inches(1000mm)
Optional speed: 5±1mm/s, 10±2mm/s, 15±3mm/s, 20±4mm/s, 30±6mm/s, 40±8mm/s, 60±12mm/s
When the load increases, the speed of linear actuator will slow down.
Max Load capacity: 8000N / 800 Kgs / 1800 lbs at 5mm/s
Linear actuator can get maximum load capacity when it operates in the vertical direction, and the pulling force is less than pushing force.
No-load current: 1~1.5A
Full load current: 6~10A
Please use a 24V/10A power supply to power a linear actuator, or use a 24V/25A power supply to power two linear actuators, or use a 24V/42A power supply to power four linear actuators.
Shaft diameter: 28mm
Mounting holes diameter: 13mm
Housing Material: Stainless steel
Stroke Rod Material: Stainless steel
Gear Material: Steel Alloy
Motor Type: Brushed DC Motor
Duty Cycle: 10%, max 2mins continuous use
Plug Standard: Ordinary Two-core Wire (Standard Four-pin Plug is optional)
Certifications: CE
Environment temperature: -26℃ to 85℃
Operating Noise: about 56dB~66dB (Linear actuators with different parameters will have different noise levels.)
IP rating: IP65
The information for Wireless remote control
Application:This DC 24V wireless remote control switch kit with radio receiver and RF transmitter.
It can long range remote control the extension and retraction of the electric linear actuator.
Feature:
Wireless control, easy to install.
Suitable for DC electric linear actuator.
You can operate the linear actuator to extend or retract by using the buttons in the receiver or by the transmitter.
With limit terminals: You can connect sensors, limit switches or external devices to limit the stroke of the linear actuator.
With wired control terminals: You can connect manual switches to control the linear actuator.
You can use the transmitter / remote to control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Receiver Parameters:
Model: S1PF-DC24
Operating Voltage: 24±2VDC
Output Voltage: 24VDC
2 control modes: Interlocking, Momentary
Quiescent Current: ≤10mA
Rated Current: 40A, so linear actuator maximum starting current cannot exceed 40A.
Wire range for the terminals: 22-12 AWG
Working Frequency: 433.92 MHz
Operating Temperature: -20°C ~ +70°C
Case size: 115mm x 95mm x 40mm (4.5 x 3.7 x 1.6 inches)
Transmitter Parameters:
Model No.: CP-3
Channel/Button: 3
Button Symbol:▲, ■, ▼
Operating Voltage: 12V (1 x 23A -12V battery)
Standby current: 4uA
Operating Current: 14mA
Operating Frequency: 433Mhz
Transmitting Distance: 500m / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 92mm x 40mm x 15mm
Matching Transmitters:
This receiver can work with different transmitters. Such as model CP-3 (500 meters), or CB-3-2 (1000 meters) etc.
Working Range:
With a transmitter (such as CP-3) to form a complete set, the maximum working distance can reach 500 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a high power transmitter, such as CB-3-2 transmitter.
Setting different control modes:
1) Setting Interlocking mode: Turn the mode switch in the receiver to "L".
The operation by the transmitter, such as CP-3:
Press button ▲ on the transmitter: The linear actuator extends outward.
Press button ■ on the transmitter: The linear actuator stops extending outward.
Press button ▼ on the transmitter: The linear actuator retracts inward.
Press button ■ on the transmitter: The linear actuator stops retracting inward.
2) Setting Momentary mode: Turn the mode switch in the receiver to "M".
The operation by the transmitter, such as CP-3:
Press and hold button ▲ on the transmitter: The linear actuator extends outward; Release button ▲: The linear actuator stops extending outward.
Press and hold button ▼ on the transmitter: The linear actuator retracts inward; Release button ▼: The linear actuator stops retracting inward.
Limit terminals:
The receiver has limit terminals, and you can connect external devices (with normally closed contact), such as sensors, limit switches to limit terminals, then use them to limit the stroke of the linear actuator.
For example, you can connect two normally closed limit switches to terminals “COM” and “UP”, and connect another normally closed limit switches to terminals “COM” and “DOWN”.
When the linear actuator extends outward, if discount two terminals “COM” and “UP”, the linear actuator automatically stop extending outward.
When the linear actuator retracts inward, if discount two terminals “COM” and “DOWN”, the linear actuator automatically stop retracting inward.
Wired control terminals:
The receiver has wired control terminals, and you can connect external devices (with normally open contact), such as manual switches to wired control terminals, then use them to control the linear actuator.
For example, you can connect three manual switches to wired control terminals “STOP”, “S1”, “COM” and “S2” according to following wiring diagram.
1) Control mode Interlocking:
When connect two terminals “S1” and “COM”, the linear actuator extends outward. And when connect two terminals “STOP” and “COM”, the linear actuator stops extending outward.
When connect two terminals “S2” and “COM”, the linear actuator retracts inward. And when connect two terminals “STOP” and “COM”, the linear actuator stops retracting inward.
2) Control mode Momentary:
When connect two terminals “S1” and “COM”, the linear actuator extends outward. And when disconnect two terminals “S1” and “COM”, the linear actuator stops extending outward.
When connect two terminals “S2” and “COM”, the linear actuator retracts inward. And when disconnect two terminals “S2” and “COM”, the linear actuator stops retracting inward.
Return or Exchange:
The Linear Actuators are the customized products, we need to produce them according to the specified parameters in your order, so that we do not accept returns or cancel orders. If customers order unsuitable linear actuators themselves, we also do not accept exchanges, please understand.