Long Range 5000 Meters 4 Channel Wireless RF Receiver Module (Model: 0020241)

Regular price $45.00

Shipping calculated at checkout.
Package Include:
1 x Wireless Receiver Module (Model 0020241)
1 x User manual

Application:
1) It forms a DC or AC wireless remote control switch with the relay module.
2) Suitable for high-level control systems.
3) Suitable for low-power electrical equipments with DC 3V to 12V.

Features:
It is a high quality new bidirectional wireless RF receiver module. It is a low power consumption and wide band wireless digital wireless communication module. Its core circuit adopts RF98 wireless receiver chip and spread spectrum communication techniques with small size, low voltage, low power consumption, high power, high sensitivity, long receiving distance, high communication rate, and strong anti-jamming performance.

Feedback function:
Can let the user know whether he/she had already connect the transmitter and receiver successfully in such a long distance.
Two-way working mode: When you press the remote control to send RF signal to the receiver, if the receiver has been successfully triggered or operated, the receiver will immediately transmit a RF feedback signal to the remote control. Then the remote control will send out a buzzing sound to inform you that the receiver has been successfully operated.

Receiver Module Parameters:
Model No.: 0020241
Working Voltage: DC 3V~12V (5V is recommended)
Output Type: High level output (DC 3V~12V)
Channel: 4 Way
Working Current: 16mA
Static Current: 5.5uA
Transmitting Current: 65mA
Working Frequency: 433.92MHZ
Modulation Method: FSK + LORA
Receiving Sensitivity: -148dBm
Working Distance: 5000 meters / 15000 ft (theoretically)
Working Temperature: -10℃~+70℃
Size: 50mm x 20mm x 10mm

Matching Transmitters:
This wireless RF Receiver Module only works with 5000 meters radio transmitters, such as transmitter CC-1 (Model: 0021060), transmitter CC-2 (Model: 0021061), and transmitter CC-4 (Model: 0021062).

Working Range:
Super long range, with a transmitter (such as CC-4) to form a complete set, the maximum working distance can reach 5000M on an open ground.
The maximum working distance is a theoretical data; it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.

Setting Different Control Modes:
1) Setting control mode Self-locking (with transmitter CC-4): Turn on the third bit of the dip switch.
Press button A on the transmitter: The pin "D3" on the receiver module outputs DC power.
Press button A on the transmitter again: The pin "D3" on the receiver module stops outputting DC power.
Press button B on the transmitter: The pin "D2" on the receiver module outputs DC power.
Press button B on the transmitter again: The pin "D2" on the receiver module stops outputting DC power.
Press button C on the transmitter: The pin "D1" on the receiver module outputs DC power.
Press button C on the transmitter again: The pin "D1" on the receiver module stops outputting DC power.
Press button D on the transmitter: The pin "D0" on the receiver module outputs DC power.
Press button D on the transmitter again: The pin "D0" on the receiver module stops outputting DC power.

2) Setting control mode Momentary (with transmitter CC-4): Turn off the second bit and the third bit of the dip switch.
Press and hold button A on the transmitter: The pin "D3" on the receiver module outputs DC power.
Release button A on the transmitter: The pin "D3" on the receiver module stops outputting DC power.
Press and hold button B on the transmitter: The pin "D2" on the receiver module outputs DC power.
Release button B on the transmitter: The pin "D2" on the receiver module stops outputting DC power.
Press and hold button C on the transmitter: The pin "D1" on the receiver module outputs DC power.
Release button C on the transmitter: The pin "D1" on the receiver module stops outputting DC power.
Press and hold button D on the transmitter: The pin "D0" on the receiver module outputs DC power.
Release button D on the transmitter: The pin "D0" on the receiver module stops outputting DC power.

3) Setting control mode Interlocking (with transmitter CC-4): Turn on the second bit of the dip switch.
Press button A on the transmitter: The pin "D3" on the receiver module outputs DC power, and other 3 pins on the receiver module stop outputting DC power.
Press button B on the transmitter: The pin "D2" on the receiver module outputs DC power, and other 3 pins on the receiver module stop outputting DC power.
Press button C on the transmitter: The pin "D1" on the receiver module outputs DC power, and other 3 pins on the receiver module stop outputting DC power.
Press button D on the transmitter: The pin "D0" on the receiver module outputs DC power, and other 3 pins on the receiver module stop outputting DC power.

Pins  D0  D1  D2  D3  GND  Null  VCC 
Function  Data output (DC power output)  Data output (DC power output)  Data output (DC power output)  Data output (DC power output)  Negative power supply  Null  Positive power supply