Package Include
1 x Receiver: S1X-AC-ANT3
1 x User manual
Application
For long range wireless remote control AC electrical equipment on/off, such as lamp, light, LED lighting, motor, pump, solenoid valve, heater, socket/outlet, etc.
Feature
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (100V~120V) used in US, CA, etc, and 220V AC (200V~240V) used in DE, UK, FR, etc.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
Receiver
Model: S1X-AC-ANT3
Operating Voltage: Compatible with AC 100~240V
Output Type: AC power output, same as input voltage.
Channel: 1 Way
3 Control Modes: Self-locking, Momentary, Interlocking
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 10A
Working Frequency: 433MHz
Operating Temperature: -20°C ~ +70°C
PCB size: 88 x 80 x 18 mm
Case size: 153 x 90 x 55 mm
Suitable Transmitters
The receiver can work with different transmitters.
When you set the receiver in Self-locking mode or Momentary mode, it should work with single button transmitter, such as model C-1 (100 meters / 300 ft range), CP-1 (500 meters / 1500 ft range), and CB-1 (1000 meters / 3000 ft range).
When you set the receiver in Interlocking mode, it should work with two buttons transmitter, such as model C-2 (100 meters / 300 ft range), CP-2 (500 meters / 1500 ft range), CD-2 (Industrial, 1000 meters / 3000 ft range), and CB-2 (1000 meters / 3000 ft range).
Working Range
With a transmitter (such as C-2) to form a complete set, the maximum working distance up to 100 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you need a longer working distance, you can replace the antenna on the receiver, or use a powerful transmitter, such as a CB-1/CB-2/CD-2 transmitter.
Wiring for Wireless Switch Receiver, click here to learn more.
Setting and Operation of the 3 Control Modes for Wireless Switch Receiver, click here to learn more.
Pairing and Deleting for Receiver and Transmitter, click here to learn more.