Package Include:
1 x Receiver: S1PU-AC-ANT3
1 x Transmitter: CB-2
1 x Transmitter: CB-2N-2
2 x Water Level Sensors
1 x User manual
Feature:
Application: This type of wireless remote control device can use a normally open output device to wirelessly control another AC or DC device, and it can be used for synchronous wireless control of various home, industrial or agricultural equipments, such as wireless control of the warning host and the warning horn, wireless control of the lights, wireless synchronization control of the equipments, and water level wireless control of the tank.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK, France...
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
High Power: Each channel can work at maximum current 30A.
With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
With external telescopic antenna, the receiver have a farther working range.
You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With characteristics of reverse power protection and over current protection.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No. S1PU-AC-ANT3
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-12 AWG
Working Frequency: 315MHz
Channel: 1CH
Control Modes: Interlocking
Static Current: ≤6mA
Maximum Working Current: 30A
Operating Temperature: -20 ° C to +70 ° C
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x68mm x 50mm
Transmitter Parameters:
Model No.: 0021024 (CB-2)
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Operating Current: 30mA
Operating Frequency: 315Mhz
Encoding Chip: PT2262 / PT2264 / SC2262
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an power switch on the side.
Unit Size: 135mm x 42mm x 25mm
Model No.: 0021046 (CB-2N-2)
With External Trigger Wires.
Triggering method: When wire 1 and wire 3 are connected, it will send wireless signal "ON". When wire 2 and wire 3 are connected, it will send wireless signal "OFF".
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 9V Rechargeable Lithium Battery, can be used for two weeks. If you want a longer working time, please use a 9V power adapter.)
Operating Current: 30mA
Operating Frequency: 315MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an power switch on the side.
Unit Size: 135mm x 42mm x 25mm
Water Level Sensor:
Body Material: PP
Float Material: PP
Temperature:-10~85℃
Max. Voltage: DC 100V
Max. Current: 0.5A
Max. Power: 10W
Working Principle of Transmitter CB-2N-2:
Transmitter CB-2N-2 is a special remote control with normally open contact trigger. It has 3 input wires for connecting two devices with normally open contact, such as warning host, cable detectors, various sensors, limit switches, Programmable Logic Controllers and so on.
This transmitter can be combined with different types of receivers to form a wireless control system, and this system is used to wirelessly control the device A through the device B with normally open contact.
Working Process:
If you want to control the device A through the normally open contacts of the device B, do as following:
1. Connect the device A to the receiver.
2. Connect the normally open contact 1 from the device B to the transmitter's input wires 1 and 3.
3. Connect the normally open contact 2 from the device B to the transmitter's input wires 2 and 3.
4. When the normally open contact 1 is connected, the transmitter's input wires 1 and 3 is also connected, the transmitter automatically emits a wireless signal "ON", which is equivalent to the function of the button A on the transmitter. When the receiver receives this wireless signal, it will activate its relay to turn on the device A.
5. When the normally open contact 2 is connected, the transmitter's input wires 2 and 3 is also connected, the transmitter automatically emits a wireless signal "OFF", which is equivalent to the function of the button B on the transmitter. When the receiver receives this wireless signal, it will deactivate its relay to turn off the device A.
Usage:
1. Installation:
1) Put the water level sensor 1 downwards and install at the low water level position in the tank; Put the water level sensor 2 upwards and install at the high water level position in the tank.
2) Connect two wires of the water level sensor 1 to wire 1 and wire 3 of transmitter CB-2N-2.
3) Connect two wires of the water level sensor 2 to wire 2 and wire 3 of transmitter CB-2N-2.
4) Connect the live wire of AC110V/220V power supply to terminal “L / +” of INPUT, and connect the neutral wire of AC110V/220V power supply to terminal “N / -” of INPUT.
5) Connect terminal B to the live wire of AC110V/220V power supply, connect terminal C to one side of AC110V/220V pump, and connect another side of AC110V/220V pump to the neutral wire of AC110V/220V power supply.
2. Operation:
1) Control pump by transmitter CB-2:
Press button A of the transmitter CB-2, the receiver outputs AC110V/220V power, and the pump is turned on.
Press button B of the transmitter CB-2, the receiver stops outputting, and the pump is turned off.
2) Automatically control pump by transmitter CB-2N-2 & Water Level Sensor:
When the water reaches the low water level, two wires of the water level sensor 1 is connected, the transmitter CB-2N-2 automatically emits a wireless signal "ON", which is equivalent to the function of the button A on the transmitter. When the receiver receives this wireless signal, it will turn on the pump motor to pump water into the tank.
When the water reaches the high water level, two wires of the water level sensor 2 is connected, the transmitter CB-2N-2 automatically emits a wireless signal "OFF", which is equivalent to the function of the button B on the transmitter. When the receiver receives this wireless signal, it will turn off the pump motor to stop pumping water.
1 x Receiver: S1PU-AC-ANT3
1 x Transmitter: CB-2
1 x Transmitter: CB-2N-2
2 x Water Level Sensors
1 x User manual
Feature:
Application: This type of wireless remote control device can use a normally open output device to wirelessly control another AC or DC device, and it can be used for synchronous wireless control of various home, industrial or agricultural equipments, such as wireless control of the warning host and the warning horn, wireless control of the lights, wireless synchronization control of the equipments, and water level wireless control of the tank.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK, France...
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
High Power: Each channel can work at maximum current 30A.
With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
With external telescopic antenna, the receiver have a farther working range.
You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With characteristics of reverse power protection and over current protection.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No. S1PU-AC-ANT3
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-12 AWG
Working Frequency: 315MHz
Channel: 1CH
Control Modes: Interlocking
Static Current: ≤6mA
Maximum Working Current: 30A
Operating Temperature: -20 ° C to +70 ° C
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x68mm x 50mm
Transmitter Parameters:
Model No.: 0021024 (CB-2)
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Operating Current: 30mA
Operating Frequency: 315Mhz
Encoding Chip: PT2262 / PT2264 / SC2262
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an power switch on the side.
Unit Size: 135mm x 42mm x 25mm
Model No.: 0021046 (CB-2N-2)
With External Trigger Wires.
Triggering method: When wire 1 and wire 3 are connected, it will send wireless signal "ON". When wire 2 and wire 3 are connected, it will send wireless signal "OFF".
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 9V Rechargeable Lithium Battery, can be used for two weeks. If you want a longer working time, please use a 9V power adapter.)
Operating Current: 30mA
Operating Frequency: 315MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Transmitting Distance: 1000m / 3000ft (theoretically)
It has an power switch on the side.
Unit Size: 135mm x 42mm x 25mm
Water Level Sensor:
Body Material: PP
Float Material: PP
Temperature:-10~85℃
Max. Voltage: DC 100V
Max. Current: 0.5A
Max. Power: 10W
Working Principle of Transmitter CB-2N-2:
Transmitter CB-2N-2 is a special remote control with normally open contact trigger. It has 3 input wires for connecting two devices with normally open contact, such as warning host, cable detectors, various sensors, limit switches, Programmable Logic Controllers and so on.
This transmitter can be combined with different types of receivers to form a wireless control system, and this system is used to wirelessly control the device A through the device B with normally open contact.
Working Process:
If you want to control the device A through the normally open contacts of the device B, do as following:
1. Connect the device A to the receiver.
2. Connect the normally open contact 1 from the device B to the transmitter's input wires 1 and 3.
3. Connect the normally open contact 2 from the device B to the transmitter's input wires 2 and 3.
4. When the normally open contact 1 is connected, the transmitter's input wires 1 and 3 is also connected, the transmitter automatically emits a wireless signal "ON", which is equivalent to the function of the button A on the transmitter. When the receiver receives this wireless signal, it will activate its relay to turn on the device A.
5. When the normally open contact 2 is connected, the transmitter's input wires 2 and 3 is also connected, the transmitter automatically emits a wireless signal "OFF", which is equivalent to the function of the button B on the transmitter. When the receiver receives this wireless signal, it will deactivate its relay to turn off the device A.
Usage:
1. Installation:
1) Put the water level sensor 1 downwards and install at the low water level position in the tank; Put the water level sensor 2 upwards and install at the high water level position in the tank.
2) Connect two wires of the water level sensor 1 to wire 1 and wire 3 of transmitter CB-2N-2.
3) Connect two wires of the water level sensor 2 to wire 2 and wire 3 of transmitter CB-2N-2.
4) Connect the live wire of AC110V/220V power supply to terminal “L / +” of INPUT, and connect the neutral wire of AC110V/220V power supply to terminal “N / -” of INPUT.
5) Connect terminal B to the live wire of AC110V/220V power supply, connect terminal C to one side of AC110V/220V pump, and connect another side of AC110V/220V pump to the neutral wire of AC110V/220V power supply.
2. Operation:
1) Control pump by transmitter CB-2:
Press button A of the transmitter CB-2, the receiver outputs AC110V/220V power, and the pump is turned on.
Press button B of the transmitter CB-2, the receiver stops outputting, and the pump is turned off.
2) Automatically control pump by transmitter CB-2N-2 & Water Level Sensor:
When the water reaches the low water level, two wires of the water level sensor 1 is connected, the transmitter CB-2N-2 automatically emits a wireless signal "ON", which is equivalent to the function of the button A on the transmitter. When the receiver receives this wireless signal, it will turn on the pump motor to pump water into the tank.
When the water reaches the high water level, two wires of the water level sensor 2 is connected, the transmitter CB-2N-2 automatically emits a wireless signal "OFF", which is equivalent to the function of the button B on the transmitter. When the receiver receives this wireless signal, it will turn off the pump motor to stop pumping water.