DC Double Pole Double Throw Switch High Power 30A

Regular price $90.00

Shipping calculated at checkout.

Package Include:
1 x Receiver: S4PA-DC
1 x User manual

Application:
This is a DC DC 9V 12V 24V high power 30A double pole double throw switch, also referred to as DPDT switch. It and the transmitter form a wireless RF remote control receiver kit. This kit can long range remote control turn on and off power supply.

Feature:
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Power Supply: Three working voltage versions, DC 9V, 12V, 24V.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
High Power: Each channel can work at maximum current 30A.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.

Receiver Parameters:
Model No.: S4PA-DC09 / S4PA-DC12 / S4PA-DC24
Power Supply (Operating Voltage): DC9V±1V (S4PA-DC09), DC12V±1V (S4PA-DC12), DC24V±2V (S4PA-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Channel: 4 Way
3 Control Modes: Self-locking, Momentary, Interlocking
Static Current: ≤6mA
Maximum Load Current each channel: 30A
Wire range for the terminals: 22-12 AWG
Working Frequency: 433MHz
Operating Temperature: -20 ° C to +70 ° C
PCB size: 170mm x 100mm x 18mm
Case size: 200mm x 120mm x 53mm

Matching Transmitters:
The receiver can work with different transmitters. such as model C-2-2 (100 Meter / 300 feet range), CP-3 (500 Meter / 1500 feet range), or CB-3-2 (1000 Meter / 3000 feet range).

Working Range:
With a transmitter (such as C-2-2) to form a complete set, the maximum working distance can reach 100 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can replace external antenna of the receiver or use a high-power transmitter, such as CB-4 transmitter.

Setting different control modes:
1) Setting Momentary mode (work with transmitter C-2-2): Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.
Press and hold button ▲ on remote: Connect terminals 1&3, and connect terminals 2&4.
Release button: disconnect terminals 1&3, and disconnect terminals 2&4.

Press and hold button ▼ on remote: Connect terminals 3&5, and connect terminals 4&6.
Release button: disconnect terminals 3&5, and disconnect terminals 4&6.

2) Setting Interlocking mode (work with transmitter CP-3): Press the learning button in the receiver 4 times, signal LED continuously flashes 4 times and then goes off.
Press button ▲ on remote: Connect terminals 1&3, and connect terminals 2&4.
Press button ■ on remote: Disconnect terminals 1&3, and disconnect terminals 2&4.

Press button ▼ on remote: Connect terminals 3&5, and connect terminals 4&6.
Press button ■ on remote: Disconnect terminals 3&5, and disconnect terminals 4&6.