DC 12 24V RF Wireless Remote Control Receiver Kit with Electric Solenoid Valve and power adapter (Model: 0020568)

Regular price $77.00

Shipping calculated at checkout.
It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, etc. It can remote control equipments on land, water and air, such as garden watering, garden drip irrigation, agricultural irrigation.

Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
DC Power Output: It can control DC equipment with voltage12V / 24V.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:
Model No.: S1X-DC12
Power Supply (Operating Voltage):DC12V±1V (S1X-DC12), DC24V±1V (S1X-DC24)
Output: DC12V (S1X-DC12), DC24V (S1X-DC24)
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Working Frequency: 433MHz
Maximum Working Current: 10A
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm

Transmitter Parameters:
Model No.: 0021001 (C-2)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433 MHz
Transmitting Distance: 100m / 300ft (theoretically)
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm

Working Range:
With a transmitter (such as C-2) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as CB-2 series transmitters.

Solenoid Valve Parameters:
Working Voltage: DC 12V, DC 24V optional
Power: 24W
Pipe size: 1/4 ", 1/2", 3/4 ", 1" optional
Thread type: G1 / 4 ", G1 / 2", G3 / 4 ", G1" optional
Internal diameter: 12MM, 20MM, 25MM, 32MM optional
Solenoid valve type: Normally Closed (power on, solenoid valve open; power off, solenoid valve close)
Working Temperature: -10°C to +100°C
Operating Pressure: 0~1.0Mpa (0~10kg/cm²)
Material of valve body and coil: 100% Brass

Setting different control modes:
1) Setting Self-locking mode: Only connect Jumper-2.
Press button A of the transmitter: Electric solenoid valve work.
Press button A of the transmitter again: Electric solenoid valve stops work.

2) Setting Momentary mode: Only connect Jumper-1.
Press and hold button A of the transmitter: Electric solenoid valve work.
Release button A of the transmitter: Electric solenoid valve stops work

3) Setting Interlocking mode: Do not connect Jumper-1 and Jumper-2.
Press button A of the transmitter: Electric solenoid valve work.
Press button B of the transmitter: Electric solenoid valve stops work.

Package Include:
1 x Receiver: S1X-DC12 / S1X-DC24
2 x Transmitter: C-2
1 x Electric solenoid valve
1 x Power adapter: DC12V/3A or DC24V/3A
1 x User manual