Stroke 16 inch 400MM 6000N 1300 lbs Electric Linear Actuator Remote Control Kit (Model: 0020584)

Regular price $162.00

Shipping calculated at checkout.

If you need a 12V power supply, please click here.
If you need a 24V power supply, please click here.
If you need external limit switches, please click here.

Package Include:
1 x Receiver: S1PF3-DC
2 x Transmitter: CWC-3L
1 x Electric Linear Actuator
2 x Mounting Brackets B
1 x User manual

Application: 

For long range wireless remote control the extension and retraction of electric linear actuator.
The DC 12V 24V 600kg 6000N 1300 lbs Electric Linear Actuator can open, close, push, pull, lift and descend other devices. Such as doors, windows, solar tracking system, medical devices, agricultural machinery, vehicles, ships, elevator platforms, lifting tables, TV lifts, robots, cabinetries, massage sofas, electric beds, medical chairs, etc.
It can replace hydraulic and pneumatic products to save power consumption.

Receiver Parameters:
Model No: S1PF3-DC
Operating Voltage: 12±1VDC (model S1PF3-DC12), or 24±2VDC (model S1PF3-DC24), the operating voltage must be specified when ordering.
Channel: 1 way
Control Mode: Momentary and Interlocking
Quiescent Current: ≤6mA
Rated Current: 15A
The Maximum Instantaneous Current of Starting Motor: 30A
Working Frequency: 433MHz
Wire range for the terminals: 22-12 AWG
Operating Temperature: -20 ° C to +70 ° C
Case size: 100mm x 67mm x 39mm

Transmitter Parameters:

Model No.: CWC-3L
Waterproof
Channel/Button: 3
Button Symbol: ▲,▼, =
Operating Voltage: 12V (1 x 27A -12V battery, can be used for 12 months)
Operating Current: 4mA
Operating Frequency: 433MHz
Transmitting Distance: 50 meters / 150ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 58mm x 30mm x 12mm

Linear Actuator Parameters:
Optional working voltage: DC 12V or DC 24V
Stroke range: 16 inches or 400 mm
Optional speed: 5±1mm/s, 9±2mm/s, 18±4mm/s, 25±5mm/s, 32±6mm/s, 50±10mm/s, 100±15mm/s
When the load increases, the speed of linear actuator will slow down.
Max Load capacity: 6000N / 600 Kgs / 1300 lbs at 5mm/s
Linear actuator can get maximum load capacity when it operates in the vertical direction, and the pulling force is less than pushing force.
No-load current: 1-2A
Max load current: 3-4A
Please use a 12V/10A or 24V/5A power supply to power a linear actuator or use a 12V/20A or 24V/10A power supply to power two linear actuators.
Shaft diameter: 24mm
Mounting holes diameter: 10mm
Housing Material: Aluminum Alloy
Stroke Rod Material: Aluminum Alloy
Gear Material: Polymer Plastic
Motor Type: Brushed DC Motor
Built-in two limit switches, linear actuator will automatically stop when stroke rod reaches the limit position.
Automatically lock after stopping, and no power supply is required.
Environment temperature: -26℃ to 85℃
Operating Noise: about 42dB~46dB (Linear actuators with different parameters will have different noise levels.)
IP rating: IP54

Thrust and speed sheet

Speed Thrust
5mm/s 6000N  /  600 kg  /  1300 lbs
9mm/s 3000N  /  300 kg  /  660 lbs
18mm/s 2000N  /  200 kg  /  440 lbs
25mm/s 1000N  /  100 kg  /  220 lbs
32mm/s 800N  /  80 kg  /  180 lbs
50mm/s 600N  /  60 kg  /  130 lbs
100mm/s 300N  /  30 kg  /  60 lbs

Setting different control modes:
1) Setting Interlocking mode: Connect JP1 or disconnect JP1&JP2
1-1) Control linear actuator by transmitter CWC-3L:
Press button ▲ of the transmitter: The electric linear actuator connected to receiver extends outward.
Press button = of the transmitter: The electric linear actuator connected to receiver stops extending outward.
Press button ▼ of the transmitter: The electric linear actuator connected to receiver retracts inward.
Press button = of the transmitter: The electric linear actuator connected to receiver stops retracting inward.

1-2) Control linear actuator by manual buttons in receiver:
Press button K3 in receiver: The electric linear actuator connected to receiver extends outward.
Press button K1 in receiver: The electric linear actuator connected to receiver retracts inward.
Press button K2 in receiver: The electric linear actuator connected to receiver stops.

2) Setting Momentary mode: Connect JP2
2-1) Control linear actuator by transmitter CWC-3L:
Press and hold button ▲ of the transmitter: The electric linear actuator connected to receiver extends outward.
Release button ▲: The electric linear actuator connected to receiver stops extending outward.
Press and hold button▼ of the transmitter: The electric linear actuator connected to receiver retracts inward.
Release button ▼: The electric linear actuator connected to receiver stops retracting inward.

2-2) Control linear actuator by manual buttons in receiver:
Press and hold button K3 in receiver: The electric linear actuator connected to receiver extends outward.
Release button K3 in receiver: The electric linear actuator stops.
Press and hold button K1 in receiver: The electric linear actuator connected to receiver retracts inward.
Release button K1 in receiver: The electric linear actuator stops.

Restrictive function:
You can connect two limit switches or sensors (normally close type) to terminals “X1” and “X2”, and then you can use limit switches or sensors to restrict Linear Actuator Stroke.
When the electric linear actuator extends, if the actuator collides with the external limit switch, the electric linear actuator will stop automatically.
When the electric linear actuator retracts, if the actuator collides with the external limit switch, the electric linear actuator will stop automatically.