Package Include:
1 x Receiver: S1PU-AC-ANT3
1 x User manual
Application:
For long range wireless remote control DC or AC equipments, such as lamp, LED lighting, motor, solenoid valve, pump, electric lock, etc.
Feature:
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Relay Output: This receiver is dry contact output, it can be used to operate both DC and AC equipments. With three output terminals: NO, COM, NC, which serves as a switch. That means you should also connect a separate power supply to equipments.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
Receiver:
Model: S1PU-AC-ANT3
Operating Voltage: Compatible with AC 100V~240V
Output Type: Relay Output
Channel: 1 CH
3 Selectable Working Modes: Self-locking, Momentary, Interlocking
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 30A
Working Frequency: 433MHz
Operating Temperature: -20 °C ~ +70 °C
PCB size: 90 x 59 x 18 mm
Case size: 138 x 68 x 50 mm
Working Range:
This receiver and transmitter (such as C-1/C-2) form a complete set, the maximum working distance may reach 300ft or 100 meters in an open area.
The maximum working distance is based on theoretical data without obstacles and any RF interference. In practice, it will be hindered by trees, walls, or other construction, and will be interfered with by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.
If you need a longer working distance, you can replace the antenna on the receiver, or use a powerful transmitter, such as a CB-1 / CB-2 / CD-2 transmitter.
Suitable Transmitters:
The receiver can work with different transmitters.
When you set the receiver in Self-locking mode or Momentary mode, it should work with single button transmitter, such as model C-1 (100 meters / 300 ft range), CP-1 (500 meters / 1500 ft range), and CB-1 (1000 meters / 3000 ft range).
When you set the receiver in Interlocking mode, it should work with two buttons transmitter, such as model C-2 (100 meters / 300 ft range), CP-2 (500 meters / 1500 ft range), CD-2 (Industrial, 1000 meters / 3000 ft range), and CB-2 (1000 meters / 3000 ft range).
Usage:
This receiver's output terminals: A for the NC terminal, B for the NO terminal, and C for the COM terminal.
Initial state of relay output terminals: Terminals B and C are Normally Open; Terminals A and C are Normally Closed.
Wiring for Wireless Switch Receiver, click here to learn more.
Setting and Operation of the 3 Control Modes for Wireless Switch Receiver, click here to learn more.
Pairing and Deleting for Receiver and Transmitter, click here to learn more.