Package Include
1 x Receiver: S2PU-DC-ANT3
1 x User manual
Application
For long range wireless remote control DC and AC equipments, such as lamp, LED lighting, motor, linear actuator, solenoid valve, pump, electric lock, etc.
Feature
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With external antenna, the receiver has a farther working range.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
Receiver
Model No.: S2PU-DC-ANT3
Operating Voltage: Compatible with DC 10~80V
Output Type: Relay Output
Quiescent Current: ≤6mA
Maximum Load Current of Relay: 30A / channel
Channel: 2 CH
3 Selectable Modes: Self-locking, Momentary, Interlocking
Working Frequency: 433MHz
Operating Temperature: -20°C ~ +70°C
PCB size: 88 x 80 x 18 mm
Case size: 153 x 90 x 55 mm
Suitable Transmitters
The receiver can work with different transmitters. such as model C-2 (100 meters / 300 ft range), CP-2 (500 meters / 1500 ft range), CD-2 (Industrial, 1000 meters / 3000 ft range), and CB-2 (1000 meters / 3000 ft range).
Working Range:
With a transmitter (such as C-2) to form a complete set, the maximum working distance can reach 100 Meter in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can replace external antenna of the receiver or use a high-power transmitter, such as CB-2 transmitter.
Usage
This receiver has three output terminals for each channel, "NC" for the NC terminal, "NO" for the NO terminal, and "COM" for the COM terminal.
Initial state of relay output terminals: Terminals “NO” and “COM” are Normally Open; Terminals “NC” and “COM” are Normally Closed.
Wiring for Wireless Switch Receiver, click here to learn more.
Setting and Operation of the 3 Control Modes for Wireless Switch Receiver, click here to learn more.
Pairing and Deleting for Receiver and Transmitter, click here to learn more.